TPS61004

Features:

Start Up Into a Full Load With Supply Voltages as Low as 0.9 V Over Full Temperature Range
Minimum 100-mA Output Current From 0.8 V Supply Voltage
High Power Conversion Efficiency,up to 90%
Power-Save Mode for Improved Efficiency at Low Output Currents
Device Quiescent Current Less Than 50 mA
Added System Security With Integrated Low-Battery Comparator
Low-EMI Converter (Integrated Antiringing Switch Across Inductor)
Micro-Size 10-Pin MSOP Package
Evaluation Modules Available (TPS6100xEVM156)


Application

Single- and Dual-Cell Battery Operated Products
MP3-Players and Wireless Headsets
Pagers and Cordless Phones
Portable Medical Diagnostic Equipment
Remote Controls


Specifications

Input voltage range, V_I (V_BAT, V_OUT, COMP, FB, LBO, EN, LBI). . 0.3 V to 3.6 V
Input voltage, V_I (SW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to 7 V
Peak current into SW  . . . . . . . . . . . . . . . . .  . . . . . .. . . . . . . . . . . . . . . 1300 mA
Continuous total power dissipation . . . . . . . . . . . . . See dissipation rating table
Operating free-air temperature range, T_A . . . . . . . . . . . . . . . . 40°C to 85°C
Maximum junction temperature, T_J .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Storage temperature range, T_stg  . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Lead temperature  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C


Description

The TPS6100x devices are boost converters intended for systems that are typically operated from a single- or dual-cell nickel-cadmium (NiCd), nickel-metal hydride (NiMH), or alkaline battery. The converter output voltage of TPS6100x can be adjusted from 1.5 V to a maximum of 3.3 V and provides a minimum output current of 100 mA. The converter starts up into a full load with a supply voltage of 0.9 V and stays in operation with supply voltages as low as 0.8 V.

The converter TPS6100x is based on a fixed-frequency, current-mode pulse-width-modulation (PWM) controller that goes into power-save mode at low load currents. The current through the switch is limited to a maximum of 1100 mA,depending on the output voltage. The current sense of TPS6100x is integrated to further minimize external component voltage. The current sense is integrated to further minimize external component