Features: ` 3.0 V to 6.0 V Input Voltage Range` ´1 and ´1.5 Charge Pump` Fully Programmable Current with I2C 64 Dimming Steps with 25mA Maximum (Sub and Main Display Banks) 4 Dimming Steps with 80mA Maximum (DM5 for Auxiliary Application)` 2% Current Matching for Sub LEDs at Light Load...
TPS60250: Features: ` 3.0 V to 6.0 V Input Voltage Range` ´1 and ´1.5 Charge Pump` Fully Programmable Current with I2C 64 Dimming Steps with 25mA Maximum (Sub and Main Display Banks) 4 Dimming Ste...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $33.48 - 33.48 / Piece
Power Management IC Development Tools 2 batt cells
VALUE | UNIT | |
VI Input voltage range (all pins) | 0.3 to 7 | V |
MAX Output current limit | 650 | mA |
HBM ESD Rating (2) | 2 | kV |
CDM ESD Rating(3) | 500 | V |
MM ESD Rating(4) | 200 | V |
TA Operating temperature range | 40 to 85 | |
TJ Maximum operating junction temperature | 150 | |
TST Storage temperature | 55 to 150 |
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under commended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The Human body model (HBM) is a 100 pF capacitor discharged through a 1.5k resistor into each pin. The testing is done according JEDECs EIA/JESD22-A114.
(3) Charged Device Model
(4) Machine Model (MM) is a 200pF capacitor discharged through a 500 nH inductor with no series resistor into each pin. The testing is done according JEDECs EIA/JESD22-A115.
fTrehequeTnPcyS6c0h2a5rg0e/2puamrep DhCig/DhCecfoficniveenrcteyr,s cthoantstuasnet dual mode 1´ and 1.5´ conversions to maximize efficiency over the input voltage range. The TPS60250/2 drive up to five white LEDs for the main display and up to two white LEDs for the sub display with ruetigliuzilnagtedadcaopntsivtean1t ´c/u1r.5re´ntchfoarrguenipfourmmp inmteondseitsy.aBndy very low-dropout current regulators, the TPS60250/2 achieve high efficiency over the full 1-cell lithium-battery input voltage range.
Four enable inputs, ENmain, ENsub1, ENsub2, and ENaux, available through the I2C, TPS60250/2 are used for simple aonn/doffDcMon5troldsisfpolratyhse, inrdeesppeenctdiveenlty.maTino, sulobw1e, rsubth2e, operating current when using one sub display LED, the TPS60250/2 provide completely separate operation for the sub display LEDs.
The TPS60250/2 are available in a 16-pin 3mm x 3mm thin QFN.