Features: ` 4.5-V to 28-V Input Range` Output Voltage 0.8 V to 90% of Input Voltage` Output Current Up to 3 A` Two Fixed Switching Frequency Versions: TPS55383: 300 kHz TPS55386: 600 kHz` Three Selectable Levels of Overcurrent Protection (Output 2)` 0.8-V 1.75% Voltage Reference` 2.1-ms Internal S...
TPS55383: Features: ` 4.5-V to 28-V Input Range` Output Voltage 0.8 V to 90% of Input Voltage` Output Current Up to 3 A` Two Fixed Switching Frequency Versions: TPS55383: 300 kHz TPS55386: 600 kHz` Three Sele...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.45 - 2.33 / Piece
DC/DC Switching Controllers Lo Inpt Vltg Triple Ch Cntrllr
US $.97 - 1.05 / Piece
DC/DC Switching Controllers Lo Input Vltg Triple Ch Cntrlr
VALUE | UNIT | ||
Input voltage range | PVDD1, PVDD2, EN1, EN2 | 30 | A |
BOOT1, BOOT2 | VSW+ 7 | ||
SW1, SW2 | 2 to 30 | ||
SW1, SW2 transient (< 50ns) | 3 to 31 | ||
BP | 6.5 | ||
SEQ, ILIM2 | 0.3 to 6.5 | ||
COMP1, COMP2 | 0.3 to 3.5 | ||
FB1, FB2 | 0.3 to 3 | ||
SW1, SW2 output current | 7 | A | |
BP load current | 35 | mA | |
Tstg | Storage temperature | 55 to +165 | |
TJ | Operating temperature | 40 to +150 | |
Soldering temperature | +260 |
(1) Permanent device damage may occur if Absolute Maximum Ratings are exceeded. Functional operation should be limited to the Recommended DC Operating Conditions detailed in this data sheet. Exposure to conditions beyond the operational limits for extended periods of time may affect device reliability.
The TPS55383 and TPS55386 are dual output,snuopnp-soyrnticnhgro3n-Aouosutpubtuacpkpliccaotinovnesrttehrast opcearpaateblferomoaf 4.5-V to 28-V input supply voltage, and require output voltages between 0.8 V and 90% of the input voltage.
With an internally-determined operating frequency and soft start time, these converters TPS55383 provide many features with a minimum of external components. The aolulotpwuintsg oufsetrheopttiwmoizaetrioronr oafmthpeliffieeersdbaarcek laococpeussnidbeler a wide range of output filter characteristics.
Channel 1 overcurrent protection of TPS55383 is set at 4.5 A, while Channel 2 overcurrent protection level is selected by cseotntinnegctlienvgelas pairnetousgerdoutonda,lltoowBfPo,r osrcalelifnt gflooaftienxgt.eTrnhael components for applications that do not need the full load capability of both outputs.
cTohnefigouuretpduttso mallaoyw beeitheernarabtleiodmeintrdicepoerndseenqtulye,ntioarl startup sequencing. Additionally, the two outputs of TPS55383 may be powered from different sources.