Features: Tracks Externally Applied Reference Voltage 30-m, 12-A Peak MOSFET Switches for High Efficiency at 6-A Continuous Output Source or Sink Current 6% to 90% VIN Output Tracking Range PWM Frequency Range:Fixed 350 kHz or Adjustable 280 to 700 kHz Load Protected by Peak Current Limit and Ther...
TPS54672: Features: Tracks Externally Applied Reference Voltage 30-m, 12-A Peak MOSFET Switches for High Efficiency at 6-A Continuous Output Source or Sink Current 6% to 90% VIN Output Tracking Range PWM Freq...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.45 - 2.33 / Piece
DC/DC Switching Controllers Lo Inpt Vltg Triple Ch Cntrllr
US $.97 - 1.05 / Piece
DC/DC Switching Controllers Lo Input Vltg Triple Ch Cntrlr
Tracks Externally Applied Reference Voltage
30-m, 12-A Peak MOSFET Switches for High Efficiency at 6-A Continuous Output Source or Sink Current
6% to 90% VIN Output Tracking Range
PWM Frequency Range:Fixed 350 kHz or Adjustable 280 to 700 kHz
Load Protected by Peak Current Limit and Thermal Shutdown
Integrated Solution Reduces Board Area and Component Count
TPS54672 | ||
Input voltage range, VI | VIN, ENA | −0.3 V to 7 V |
RT | −0.3 V to 6 V | |
VSENSE, REFIN | −0.3 V to 4 V | |
BOOT | −0.3 V to 17 V | |
Output voltage range, VO | VBIAS, COMP, STATUS | −0.3 V to 7 V |
PH | −0.3 V to 10 V | |
Source current, IO | PH | Internally Limited |
COMP, VBIAS | 6 mA | |
Sink current, IS | PH | 12 A |
COMP | 6 mA | |
STATUS | 10 mA | |
Voltage differential, AGND to PGND | ±0.6 V | |
Operating virtual junction temperature range, TJ | −40°C to 125°C | |
Storage temperature, Tstg | −65°C to 150°C | |
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds | 300°C |
As a member of the SWIFT family of dc/dc regulators, the TPS54672 active bus termination synchronous PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier, TPS54672 enables maximum performance and flexibility in choosing the output filter L and C components; an under-voltagelockout circuit to prevent start-up until the input voltage reaches 3 V; a slow-start control to limit in-rush currents;and a status output to indicate valid operating conditions.
The TPS54672 is available in a thermally enhanced 28-pin TSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules and the SWIFT™ designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.