Features: · Tracks Externally Applied Reference Voltage· 60-mW MOSFET Switches for High Efficiency at 3-A Continuous Output Source or Sink Current· 6% to 90% VI Output Tracking Range· Wide PWM Frequency: Fixed 350 kHz or Adjustable 280 kHz to 700 kHz· Load Protected by Peak Current Limit and Therm...
TPS54372: Features: · Tracks Externally Applied Reference Voltage· 60-mW MOSFET Switches for High Efficiency at 3-A Continuous Output Source or Sink Current· 6% to 90% VI Output Tracking Range· Wide PWM Frequ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.45 - 2.33 / Piece
DC/DC Switching Controllers Lo Inpt Vltg Triple Ch Cntrllr
US $.97 - 1.05 / Piece
DC/DC Switching Controllers Lo Input Vltg Triple Ch Cntrlr
· DDR Memory Termination Voltage
· Active Termination of GTL and SSTL
High-Speed Logic Families
· DAC Controlled, High-Current Output Stage
· Precision Point-of-Load Power Supply
TPS54372 |
UNITS | ||
Input voltage range, VI | VIN, ENA |
0.3 to 7 |
V |
RT |
0.3 to 6 | ||
VSENSE, REFIN |
0.3 to 4 | ||
BOOT |
0.3 to 17 | ||
Output voltage range, VO | VBIAS, COMP, STATUS |
0.3 to 7 |
V |
PH |
0.6 to 6 | ||
Source current, IO | PH |
Internally limited | |
COMP, VBIAS |
6 |
mA | |
Sink current, IS | PH |
6 |
A |
COMP |
6 |
mA | |
ENA, STATUS |
10 | ||
Voltage differential | AGND to PGND |
±0.3 |
V |
Operating virtual junction temperature range, TJ |
40 to 125 |
||
Storage temperature, Tstg |
65 to 150 |
||
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds |
300 |
As a member of the SWIFT™ family of dc/dc regulators, the TPS54372 low-input voltage, high-output current, synchronous-buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier, TPS54372 enables maximum performance under transient conditions and flexibility in choosing the output filter L and C components; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a status output to indicate valid operating conditions.
The TPS54372 is available in a thermally enhanced 20-pin TSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules and the SWIFT™ designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment devel opment cycles.