Features: ` Controlled Baseline
One Assembly/Test Site, One Fabrication Site
` Enhanced Diminishing Manufacturing Sources (DMS) Support
` Enhanced Product-Change Notification
` Qualification Pedigree (1)
` Wide Input Voltage Range: 5.5 V to 35 V
` Up to 2-A Continuous (3-A Peak) Output Current
` High Efficiency up to 95% Enabled by 110-mW Integrated MOSFET Switch
` Wide Output Voltage Range: Adjustable Down to 1.22 V with 1.5% Initial Accuracy
` Internal Compensation Minimizes External Parts Count
` Fixed 500-kHz Switching Frequency for Small Filter Size
` Improved Line Regulation and Transient Response by Input Voltage Feed Forward
` System Protected by Overcurrent Limiting and Thermal Shutdown
` -55 to 125 Operating Junction Temperature Range
` Available in Small 8-Pin SOIC Package
` For SWIFT™ Documentation, Application Reports, and Design Software, See the TI Website at www.ti.com/swift
(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
Application· Consumer: Set-Top Boxes, DVDs, LCD Displays
· Industrial and Car Audio Power Supplies
· Battery Chargers, High-Power LED Supplies
· 12-V/24-V Distributed Power SystemsPinout
Specificationsover operating free-air temperature range (unless otherwise noted)
|
VALUE |
UNIT |
| VI Input voltage range |
VIN |
0.3 to 38(3) |
V |
| BOOT |
0.3 to 50 |
| PH (steady-state) |
0.6 to 38(3) |
| EN |
0.3 to 7 |
| VSENSE |
0.3 to 3 |
| BOOT-PH |
10 |
| PH (transient < 10 ns) |
-1.2 |
| IO Source current |
PH |
Internally limited |
|
| Ilkg Leakage current |
PH |
10 |
A |
| TJ Operating virtual junction temperature range |
55 to 150 |
|
| Tstg Storage temperature range |
65 to 150 |
|
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to network ground terminal.
(3) Approaching the absolute maximum rating for the VIN pin may cause the voltage on the PH pin to exceed the absolute maximum rating.DescriptionAs a member of the SWIFT™ TPS5420 family of dc/dc regulators, the TPS5420 is a high-output-current PWM converter that integrates a low-resistance high-side N-channel MOSFET. Included on the substrate with the listed features of TPS5420 is a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions, an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5 V, an internally set slow-start circuit to limit inrush currents, and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18 mA, typically. Other features include an active high enable, overcurrent protection, and thermal shutdown. To reduce design complexity and external component count, the TPS5420 feedback loop is internally compensated.
The TPS5420 device is available in an easy to use 8-pin SOIC package. TI TPS5420 provides evaluation modules and the SWIFT Designer Software tool to aid in quickly achieving high-performance power-supply designs to meet aggressive equipment development cycles.
TPS5420-EP Data Sheet
