Features: · Input Operating Voltage Range: 4.5 V to 18 V· Up to 20-A Output Currents· Supports Pre-Biased Outputs· 0.5% 0.591-V Reference· 600 kHz (TPS40192) and 300 kHz (TPS40193) Switching Frequencies· Three Selectable Thermally Compensated Short Circuit Protection Levels· Hiccup Restart from Fa...
TPS40192: Features: · Input Operating Voltage Range: 4.5 V to 18 V· Up to 20-A Output Currents· Supports Pre-Biased Outputs· 0.5% 0.591-V Reference· 600 kHz (TPS40192) and 300 kHz (TPS40193) Switching Frequen...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.31 - 2.04 / Piece
Voltage Mode PWM Controllers Low Input 2.25V-5.5V 300 kHz Frequency
US $1.31 - 2.04 / Piece
Voltage Mode PWM Controllers Low Input 2.25V-5.5V 300 kHz Frequency
TPS40192 TPS40193 |
UNIT | ||
Input voltage range | VDD, ENABLE | 0.3 to 20 | V |
SW | 5 to 25 | ||
BOOT, HDRV | 0.3 to 30 | ||
BOOT-SW, HDRV-SW (differential from BOOT or HDRV to SW) | -0.3 to 6 | ||
COMP, FB, BP5, LDRV, PGD | -0.3 to 6 | ||
TJ Operating junction temperature range | 40 to 150 | ||
Tstg Storage temperature | 55 to 150 |
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
TPS40192 and TPS40193 are cost-optimized synchronous buck controllers that operate from 4.5 V tvoolta1g8e-mVodienpcuot.ntrTohl easrcehitceocntutrroellewristh itmheplesmwietcnht inga frequency fixed at either 600 kHz (TPS40192) or 300 kHz (TPS40193). The higher switching frequency of TPS40192 facilitates the use of smaller inductor and output capacitors, thereby providing a compact cpoonwdeur-cstiuopnplsychesmoelutiisonu.sedAtno praedvaepnttivsehooatntthi-rcoruogshs current in the power FETs.