Features: Operating Input Voltage 2.25 V to 5.5 V Output Voltage as Low as 0.7 V 1% Internal 0.7 V Reference Predictive Gate Drive™ N-Channel MOSFET Drivers for Higher Efficiency Externally Adjustable Soft-Start and Overcurrent Limit Fixed-Frequency Voltage-Mode Control − TPS40007, 30...
TPS40007: Features: Operating Input Voltage 2.25 V to 5.5 V Output Voltage as Low as 0.7 V 1% Internal 0.7 V Reference Predictive Gate Drive™ N-Channel MOSFET Drivers for Higher Efficiency Externally A...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.31 - 2.04 / Piece
Voltage Mode PWM Controllers Low Input 2.25V-5.5V 300 kHz Frequency
US $1.31 - 2.04 / Piece
Voltage Mode PWM Controllers Low Input 2.25V-5.5V 300 kHz Frequency
TPS4000x | UNIT | ||
Input voltage range, VIN | BOOT | VSW + 6.5 | V |
COMP, FB, ILIM, SS/SD | −0.3 to 6.5 | ||
SW | −3 to 10.5 | ||
SWT (SW transient < 50 ns) | −5 | ||
VDD | 6.5 | ||
Operating junction temperature range, TJ | −40 to 150 | °C | |
Storage temperature, Tstg | −55 to 150 | ||
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds | 260 |
The TPS4000x are controllers for low-voltage,non-isolated synchronous buck regulators. These TPS4000x controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the TPS4000x device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI's proprietary Predictive Gate Drive™ technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs can be used, or heat sinking can be reduced or even eliminated.