Features: *Operating Input Voltage 2.25 V to 5.5 V*Output Voltage as Low as 0.7 V*1% Internal 0.7 V Reference*Predictive Gate Drive™ N-Channel MOSFET Drivers for Higher Efficiency*Externally Adjustable Soft-Start and Overcurrent Limit*Source-Only Current or Source/Sink Current*Versions for S...
TPS40005: Features: *Operating Input Voltage 2.25 V to 5.5 V*Output Voltage as Low as 0.7 V*1% Internal 0.7 V Reference*Predictive Gate Drive™ N-Channel MOSFET Drivers for Higher Efficiency*Externally A...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.31 - 2.04 / Piece
Voltage Mode PWM Controllers Low Input 2.25V-5.5V 300 kHz Frequency
US $1.31 - 2.04 / Piece
Voltage Mode PWM Controllers Low Input 2.25V-5.5V 300 kHz Frequency
The TPS4000x are controllers for low-voltage,non-isolated synchronous buck regulators. These TPS4000x controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the TPS4000x device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI's proprietary Predictive Gate Drive technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs can be used, or heat sinking can be reduced or even eliminated.