Features: ` Qualification in Accordance With AEC-Q100†` Qualified for Automotive Applications` Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval` Single Voltage Detector (TPS3803): Adjustable/1.5 V` Dual Voltage Detector (TPS3805): Adjustable/3.3 V...
TPS3803-Q1_1112695: Features: ` Qualification in Accordance With AEC-Q100†` Qualified for Automotive Applications` Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval` Si...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
` Qualification in Accordance With AEC-Q100†
` Qualified for Automotive Applications
` Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval
` Single Voltage Detector (TPS3803): Adjustable/1.5 V
` Dual Voltage Detector (TPS3805): Adjustable/3.3 V
` High ±1.5% Threshold Voltage Accuracy
` Supply Current: 3 A Typical at VDD = 3.3 V
` Push/Pull Reset Output (TPS3805) Open-Drain Reset Output (TPS3803)
` Temperature Range . . . −40 to 125
` Five-Pin SC−70 Package
† Contact factory for details. Q100 qualification data available on request.
· Applications Using DSPs, Microcontrollers, or Microprocessors
· Wireless Communication Systems
· Portable/Battery-Powered Equipment
· Programmable Controls
· Intelligent Instruments
· Industrial Equipment
· Notebook/Desktop Computers
· Automotive Systems
absolute maximum ratings over operating free-air temperature (unless otherwise noted)†
Supply voltage, VDD (see Note1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
All other pins (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 7 V
Maximum low-output current, IOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 mA
Maximum high-output current, IOH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −5 mA
Input clamp current, IIK (VI<0 or VI>VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA
Output clamp current, IOK (VO<0 or VO>VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40 to 125
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65 to 150
Soldering temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute−maximum−rated conditions for extended periods may affect device reliability.
NOTE 1: All voltage values are with respect to GND. For reliable operation the device should not be continuously operated at 7 V for more than t=1000 h.
The TPS3803 and TPS3805 families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSPs and processorbased systems.
In the TPS3803 and TPS3805 families ,the TPS3803G15 device has a fixed-sense threshold voltage VIT set by an internal voltage divider, whereas the TPS3803−01 has an adjustable SENSE input that can be configured by two external resistors. In addition to the fixed sense threshold monitored at VDD, the TPS3805 devices provide a second adjustable SENSE input. RESET is asserted in case any of the two voltages drops below VIT.
During power on, RESET is asserted when supply voltage VDD becomes higher than 0.8 V. Thereafter, the supervisory circuit monitors VDD (and/or SENSE) and keeps RESET active as long as VDD or SENSE remains below the threshold voltage VIT. As soon as VDD (SENSE) rises above the threshold voltage VIT, RESET is deasserted again. The TPS3803 and TPS3805 families product spectrum is designed for 1.5 V, 3.3 V, and adjustable supply voltages. The devices are available in a five-pin SC-70 package. The TPS3803 and TPS3805 devices are characterized for operation over a temperature range of −40 to 125.