Features: SpecificationsDescription The TPS3803 and TPS3805 families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSPs and processor-based systems.The TPS3803G15 device has a fixed-sense threshold voltage VIT set by an internal voltage divider, where...
TPS3803-01-EP: Features: SpecificationsDescription The TPS3803 and TPS3805 families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSPs and processor-based systems.The...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The TPS3803 and TPS3805 families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSPs and processor-based systems.The TPS3803G15 device has a fixed-sense threshold voltage VIT set by an internal voltage divider, whereas the TPS3803−01 has an adjustable SENSE input that can be configured by two external resistors. In addition to the fixed sense threshold monitored at VDD, the TPS3805 devices provide a second adjustable SENSE input. RESET is asserted in case any of the two voltages drops below VIT.During power on, RESET is asserted when supply voltage VDD becomes higher than 0.8 V.Thereafter, the supervisory circuit monitors VDD (and/or SENSE) and keeps RESET active as long as VDD or SENSE remains below the threshold voltage VIT. As soon as VDD (SENSE) rises above the threshold voltage VIT, RESET is deasserted again. The product spectrum is designed for 1.5 V, 3.3 V, and adjustable supply voltages. The devices are available in a five-pin SC-70 package,
In the TPS3803 and TPS3805 families ,the TPS3803-01-EP,TPS3803G15-EP and TPS3805H33-EP has 11 features.The first one is Controlled Baseline One Assembly/Test Site, One Fabrication site.The second one is Extended Temperature Performance of Up to −55°C to 125°C.The third one is Enhanced Diminishing Manufacturing Sources (DMS) Support.The fourth one is Enhanced Product-Change Notification.The fifth one is Qualification Pedigree†.The sixth one is Single Voltage Detector (TPS3803):Adjustable/1.5 V.† Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.The seventh one is Dual Voltage Detector (TPS3805):Adjustable/3.3 V.The eighth one is High ±1.5% Threshold Voltage Accuracy.The ninth one is Supply Current: 3 A Typical at VDD = 3.3 V.The tenth one is Push/Pull Reset Output (TPS3805) and Open-Drain Reset Output (TPS3803).The eleventh one is Five-Pin SC−70 Package.