Features: Wide Input Supply Range: −36 V to −80 V Transient Rating to −100 V Improved Transient Response Enable Input (EN) Programmable Current Limit Programmable Current Slew Rate Fault Timer to Eliminate Nuisance Trips Open-Drain Power Good Output (PG) 8-Pin MSOP PackageApplica...
TPS2998: Features: Wide Input Supply Range: −36 V to −80 V Transient Rating to −100 V Improved Transient Response Enable Input (EN) Programmable Current Limit Programmable Current Slew Rate...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.42 - .86 / Piece
Power Switch ICs - USB Sgl Channel,Crnt-Ltd USB Pwr Dist Switch
US $.28 - .3 / Piece
Power Switch ICs - USB Sgl Channel,Crnt-Ltd USB Pwr Dist Switch
US $.53 - .86 / Piece
Power Switch ICs - USB SGL CH,CURRENT-LTD USB PWR DISTR SWITCH
TPS2398/1 | UNIT | |
Input voltage range, all pins except RTN, EN, PG(2) | −0.3 V to 15 | V |
Input voltage range, RTN(2) | −0.3 V to 100 | V |
Input voltage range, EN(2)(3) | −0.3 V to 100 | V |
Output voltage range, PG(2)(4) | −0.3 V to 100 | V |
Continuous output current, PG | 10 | mA |
Continuous total power dissipation | see Dissipation Rating Table | |
Operating junction temperature range, TJ | −55 to 125 | |
Storage temperature range, Tstg | −65 to 150 | |
Lead temperature soldering 1,6 mm (1/16 inch) from case for 10 seconds | 260 |
The TPS2398 and TPS2399 integrated circuits are hot swap power managers optimized for use in nominal −48-V systems. For redundant-supply systems, TPS2398 and TPS2399 incorporate an improved circuit breaker response that provides rapid protection from short circuits, while still enabling plug-ins to tolerate large transients that can be generated by the sudden switchover to a higher voltage supply. TPS2398 and TPS2399 are designed for supply voltage ranges up to −80 V, and are rated to withstand spikes to −100 V.In conjunction with an external N-channel FET and sense resistor, they can be used to enable live insertion of plug-in cards and modules in powered systems. Both devices provide load current slew rate and peak magnitude limiting, easily programmed by sense resistor value and a singleexternal capacitor.