TPS2849

The TPS2838/39/48/49 devices are MOSFET drivers designed for high-performance synchronous power supplies. The TPS2838/39/48/49  drivers can source and sink up to 4-A peak current at a 14-V drive voltage. These TPS2838/39/48/49  are ideal devices to use with power supply controllers that do not have on-chip drivers. The low-side driver is capable of driving loads of 3.3 nF in 10-ns rise/fall times and has 40-ns propagation delays at room temperature.

The TPS2838/39/48/49  MOSFET drivers have an integrated 150-mA regulator, so the gate drive voltage can be optimized for specific MOSFETs. The TPS2848 and TPS2849 have a fixed 8-V drive regulator,while the TPS2838/39 allow the drive regulator to be adjusted from 4 V to 14 V by selection of two external resistors. 

The TPS2838/39/48/49  devices feature VDRV to PGND shootthrough protection with adaptive/adjustable deadtime control. The deadtime, for turning on the high-side FET from LOWDR transitioning low, is adjustable with an external capacitor on the DELAY pin. This allows compensation for the effect the gate resistor has on the synchronous FET turn off. The adaptive deadtime prevents the turning on of the low-side FET until the voltage on the BOOTLO pin falls below a threshold after the high-side FET stops conducting. The high-side drive can be configured as a ground referenced driver or a floating bootstrap driver. The internal Schottky diode minimizes the size and number of external components needed for the bootstrap driver circuit. Only one external ceramic capacitor is required to configure the bootstrap driver.