Features: · 15-W/ch into an 8-W Load From a 16-V Supply· Operates from 10 V to 26 V· Efficient Class-D Operation Eliminates theNeed for Heat Sinks· Four Selectable, Fixed Gain Settings· Differential Inputs· Thermal and Short-Circuit Protection WithAuto Recovery Feature· Clock Output for Synchroniz...
TPA3107D2: Features: · 15-W/ch into an 8-W Load From a 16-V Supply· Operates from 10 V to 26 V· Efficient Class-D Operation Eliminates theNeed for Heat Sinks· Four Selectable, Fixed Gain Settings· Differential...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
UNIT | ||
0.3 V to 30 V | ||
VCC Supply voltage | AVCC, PVCC | 0.3 V to VCC + 0.3 V |
VI Input voltage | SHUTDOWN, MUTE | 0.3 V to VREG + 0.5 V |
GAIN0, GAIN1, RINN, RINP, LINN, LINP, MSTR/SLV, SYNC | See Dissipation Rating Table | |
Continuous total power dissipation | 40 to 85 | |
TA Operating free-air temperature range | 40 to 150 | |
TJ Operating junction temperature range(2) | 65 to 150 | |
Tstg Storage temperature range | Human body model (3) (all pins) | ±2 kV |
Electrostatic discharge | Charged-device model (4) (all pins) | ±500 V |
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operations of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The TPA3107D2 incorporates an exposed thermal pad on the underside of the chip. This acts as a heatsink, and it must be connected to a thermally dissipating plane for proper power dissipation. Failure to do so may result in the device going into thermal protection shutdown. See TI Technical Briefs SCBA017D and SLUA271 for more information about using the QFN thermal pad. See TI Technical
Briefs SLMA002 for more information about using the HTQFP thermal pad.
(3) In accordance with JEDEC Standard 22, Test Method A114-B.
(4) In accordance with JEDEC Standard 22, Test Method C101-A
The TPA3107D2 is a 15-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers.
The TPA3107D2 can drive stereo speakers as low as 6 W. The high efficiency of the TPA3107D2, 87%, eliminates the need for an external heat sink when playing music.The gain of the amplifier is controlled by two gain select pins. The gain selections are 20, 26, 32, 36 dB.The outputs are fully protected against shorts to GND, VCC, and output-to-output shorts with an auto recovery feature and monitor output.