DescriptionThe TOCP101X is designed as optical fiber with fiber optic connections for plastic cladding silica fiber with fiber optic connectors.TOCP101X has four fetures. (1)Conform to JISF05 type. (2)Simplex type. (3)PCF (200/300um). (4)Reinforced type. Those are all the main features.Some absolu...
TOCP101X: DescriptionThe TOCP101X is designed as optical fiber with fiber optic connections for plastic cladding silica fiber with fiber optic connectors.TOCP101X has four fetures. (1)Conform to JISF05 type. ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The TOCP101X is designed as optical fiber with fiber optic connections for plastic cladding silica fiber with fiber optic connectors.
TOCP101X has four fetures. (1)Conform to JISF05 type. (2)Simplex type. (3)PCF (200/300um). (4)Reinforced type. Those are all the main features.
Some absolute maximum ratings of TOCP101X have been concluded into several points as follow. (1)Its storage temperature range would be from -40°C to 70°C. (2)Its operating temperature range would be from -20°C to 70°C. (3)Its tension between fiber and connector would be 19.6N. (4)Its tension optical fiber would be 735N. (5)Its bending dadius would be min 25mm. (5)Its transmission loss would be typ 6dB/km and max 7dB/km. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.
Also some precautions for operation of TOCP101X are concluded as follow. (1)The maximum ratngs are the limit values which should be not exceeded when using ths product. All of there values must be within the defined range. If the maximum ratings, are exceeded the deviced characteristics may not be recoverable and, in extreme cases, permanent damage to the product may result. (2)Care should be taken not to drop heavy objects onto the optical fiber cables. (3)When connecting or disconnecting the optical fiber with fiber optic connector, be sure to hold the fiber optic connector. Do not hold the optical fiber cable when connecting or disconnecting. (4)When inserting the fiber optic connector into the fiber optic transmitting/ receiving module, be sure to follow the correct fitting alignment. (5)Keep the end face of the optical fiber with fiber optic connector clean. If contaminated, wipe it gently with tissue paper. (6)When bending the optical fiber cable to install it, note that the recommended bending radius is six to ten times longer than the minimum bending radius. And so on. If you have any question or suggestion or want to know more information of TOCP101X please contact us for details. Thank you!