TMP88PS49N

The TMP88PS49N is designed as a one-time PROM microtroller with low power 514Kbits electrically programmable read only memory for the TMP88CK49 / CM49 / CS49 system evalution.

Some absolute maximum ratings TMP88PS49N have been concluded into several points as follow. The first one is supply voltage which would be from -0.3V to 6.5V. The second one is about its program voltage which would be from -0.3V to 13.0V. The third one is about its input voltage which would be from -0.3V to Vdd+0.3V. The fourth one is about its output voltage which would be from -0.3V to Vdd+0.3V and it would be from -0.3V to 5.5V for P20, source open drain ports. The fifth one is about its output current (per 1 pin) which would be 3.2mA for P1, P2, P4, P5, P6, P7 and would be 20mA for P0 and would be 30mA for P3. The sixth one is about its output current total which would be 120mA for P1, P2, P4, P5, P6, P7 and would be 60mA for P0 and 120mA for P3. The seventh one is about its power dissipation which would be 600mW. The eighth one is about its soldering temperature (time) which would be 260°C (10s). The ninth one is about its storage temperature which would be from -55°C to 125°C. The tenth one is about its operating temperature range which would be from -40°C to 85°C. It should be noted that the absolute maximum ratings are rated values which must not be exceeded during operation, even for an instant.

Also some DC characteristics about TMP88PS49N. The first one is about its hysteresis voltage which would be typ 0.9V. The second one is about its input current which would be max ±2uA. The third one is about its input resistance which would be min 90k and typ 220k and max 510k. The fourth one is about its output leakage current which would be max ±2uA. The fifth one is about its output high voltage which would be min 4.1V. And so on. For more information please contact us.