TMP87PP23F

The TMP87PP23F is designed as a one-time PROM microtroller with low power 384Kbits electrically programmable read only memory for the TMP87CM23A / CP24A system evalution.

Some absolute maximum ratings TMP87PP23F have been concluded into several points as follow. The first one is supply voltage which would be from -0.3V to 6.5V. The second one is about its program voltage which would be from -0.3V to 13.0V. The third one is about its input voltage which would be from -0.3V to Vdd+0.3V. The fourth one is about its output voltage which would be from -0.3V to Vdd+0.3V. The fifth one is about its output current (per 1 pin) which would be 3.2mA for P0, P1, P2, P3, P5, P6, P7, P8, P9, P4 (except P41) and would be 30mA for P41. The sixth one is about its output current total which would be 120mA for P0, P1, P2, P3, P5, P6, P7, P8, P9, P4 (except P41) and would be 30mA for P41. The seventh one is about its power dissipation which would be 350mW. The eighth one is about its soldering temperature (time) which would be 260°C (10s). The ninth one is about its storage temperature which would be from -55°C to 125°C. The tenth one is about its operating temperature range which would be from -30°C to 70°C. It should be noted that the absolute maximum ratings are rated values which must not be exceeded during operation, even for an instant.

Also some DC characteristics about TMP87PP23F. The first one is about its hysteresis voltage which would be typ 0.9V. The second one is about its input current which would be max ±2uA. The third one is about its input resistance which would be min 100k and typ 220k and max 450k. The fourth one is about its output leakage current which would be max 2uA. The fifth one is about its output high voltage which would be min 4.1V for tri-state port and would be min 2.4V for push-pull port. The sixth one is about its output low voltage which would be max 0.4V. And so on. For more information please contact us.