TMP87PM74F

The TMP87PM74F is designed as a one-time PROM microtroller with low power 256Kbits electrically programmable read only memory for the 87CH74A / M74A system evalution.

Some absolute maximum ratings TMP87PM74F have been concluded into several points as follow. The first one is supply voltage which would be from -0.3V to 6.5V. The second one is about its program voltage which would be from -0.3V to 13.0V. The third one is about its input voltage which would be from -0.3V to Vdd+0.3V. The fourth one is about its output voltage which would be from -0.3V to Vdd+0.3V and it would be from Vdd-40V to Vdd+0.3V for source open drain ports. The fifth one is about its output current (per 1 pin) which would be 3.2mA for P15 to P17, P3, P4, P5 and would be 30mA for P0, P10 to P14, P2 and would be -12mA for P8, P9, PD and would be -25mA for P6, P7. The sixth one is about its output current total which would be 60mA for P15 to P17, P3, P4, P5 and would be 160mA for P0, P10 to P14, P2 and would be -200mA for P6, P7, P8, P9, PD. The seventh one is about its power dissipation which would be 1200mW. The eighth one is about its soldering temperature (time) which would be 260°C (10s). The ninth one is about its storage temperature which would be from -55°C to 125°C. The tenth one is about its operating temperature range which would be from -30°C to 70°C. It should be noted that the absolute maximum ratings are rated values which must not be exceeded during operation, even for an instant.

Also some DC characteristics about TMP87PM74F . The first one is about its hysteresis voltage which would be typ 0.9V. The second one is about its input current which would be max ±2uA and it would be max 80uA for PD port. The third one is about its input resistance which would be min 100k and typ 220k and max 450k. The fourth one is about its pull down resistance which would be min 50k and typ 80k and max 110k. And so on. For more information please contact us.