TMP87P844N

The TMP87P844N is designed as a one-time PROM microtroller with low power 64Kbits electrically programmable read only memory for the 87C444 / 844 system evalution.

Some absolute maximum ratings TMP87P844N have been concluded into several points as follow. The first one is supply voltage which would be from -0.3V to 6.5V. The second one is about its program voltage which would be from -0.3V to 13.0V. The third one is about its input voltage which would be from -0.3V to Vdd+0.3V. The fourth one is about its output voltage which would be from -0.3V to Vdd+0.3V and it would be from -0.3V to Vdd+0.3V for sink open drain pin except RESET. The fifth one is about its output current (per 1 pin) which would be 3.2mA. The sixth one is about its output current total which would be 120mA. The seventh one is about its power dissipation which would be 600mW. The eighth one is about its soldering temperature (time) which would be 260°C (10s). The ninth one is about its storage temperature which would be from -55°C to 125°C. The tenth one is about its operating temperature range which would be from -30°C to 70°C. It should be noted that the absolute maximum ratings are rated values which must not be exceeded during operation, even for an instant.

Also some DC characteristics about TMP87P844N. The first one is about its hysteresis voltage which would be typ 0.9V. The second one is about its input current which would be max ±2uA. The third one is about its input resistance which would be min 100k and typ 220k and max 450k. The fourth one is about its output leakage current which would be max ±2uA. The fifth one is about its output high voltage which would be min 4.1V. The sixth one is about its output low voltage which would be max 0.4V. And so on. For more information please contact us.