TMP47P800N

The TMP47P800N is designed as the system evalution LSI of 47C800 with 64K bits one-time PROM. It programs / verifies using an adapter socket to connect with PROM programmer, as it is in TMM2764AD.

Some TMP47P800N absolute maximum ratings have been concluded into several points as follow. The first one is about its supply voltage which would be from -0.3V to 7V. The second one is about its input voltage which would be from -0.3V to Vdd+0.3V. The third one is about its output voltage which would be from -0.3V to Vdd+0.3V and it would be from -0.3V to 10V for sink open drain pin except R7. The fourth one is about its output current (per 1 pin) which would be 3.2mA for port R and would be 30mA for P1, P2. The fifth one is about its output current total which would be 120mA. The sixth one is about its power dissipation which would be 600mW. The seventh one is about TMP47P800N's soldering temperature which would be 260°C (10s). The eighth one is about its storage temperature range which would be from -55°C to 125°C. The ninth one is about its operating temperature range which would be from -40°C to 70°C. It should be noted that the absolute maximum ratings are rated values which must not be exceeded during operation, even for an instant. Any one of the ratings must not be exceeded.

Also some DC characteristics about TMP47P800N. The first one is about its hysteresis voltage which would be typ 0.7V. The second one is about its low level input current which would be max -2mA. The third one is about its input resistance which would be min 100k and typ 220k and max 450k. The fourth one is about its output leakage current which would be max 0.4uA. The fifth one is about its output level high voltage which would be min 2.4V. The sixth one is about its output level low voltage which would be max 0.4V. And so on. For more information please contact us.