TMP47P186M

The TMP47P186M is designed as a system evalution LSI with a built-in 1 Kbyte E2PROM as ROM.

Some TMP47P186M absolute maximum ratings have been concluded into several points as follow. The first one is supply voltage which would be from -0.3V to 6.5V. The second one is about its input voltage which would be from -0.3V to Vdd+0.3V. The third one is about its output voltage which would be from -0.3V to Vdd+0.3V. The fourth one is about its output current (per 1 pin) which would be 3mA. The fifth one is about TMP47P186M's output current (total for all pins) which would be 12mA. The sixth one is about its power dissipation which would be 88mW. The seventh one is about its soldering temperature (time) which would be 260°C (10s). The eighth one is about its storage temperature which would be from -55°C to 125°C. The ninth one is about TMP47P186M's operating temperature range which would be from -40°C to 85°C. It should be noted that the absolute maximum ratings are rated values which must not be exceeded during operation, even for an instant. If any absolute maximum rating is exceeded, a device may break down or its performance may be degraded, causing it to catch fire or explode resulting in injury to the user.

Also some DC characteristics about TMP47P186M. The first one is about its hysteresis voltage which would be typ 0.7V. The second one is about its input current which would be max ±2uA. The third one is about its input resistance which would be min 100k and typ 220k and max 450k. The fourth one is about its output high voltage which would be min 2.4V at Vdd=4.5V and min 2.0V at Vdd=2.2V. The fifth one is about TMP47P186M's output low voltage which would be max 0.4V at Vdd=4.5V and max 0.1V at Vdd=2.2V. The sixth one is about its power supply current at nominal operation which would be typ 2mA and max 4mA at Vdd=5.5V except for E2PROM erase / write and would be typ 5mA and max 7mA during E2PROM erase / write. And so on. For more information please contact us.