| Input voltage range |
|
85 264 VAC |
| Input frequency |
|
47 440 Hz |
| Input current no load |
TML 5 models
TML 10 models
TML 15 models
TML 30 models |
115 VAC/230 VAC
10 mA / 15 mA typ.
15 mA / 20 mA typ
18 mA / 25 mA typ.
30 mA / 55 mA typ. |
| Input current full load |
TML 5 models
TML 10 models
TML 15 models
TML 30 models |
115 VAC/230 VAC
160 mA / 80 mA typ.
200 mA / 120 mA typ
280 mA / 165 mA typ.
550 mA / 320 mA typ. |
| Inrush current (< 2 ms) |
|
115 VAC / 230 VAC
10 A max / 20 A max |
| External fuse (recommended) |
|
1.5 A slow blow type |
| Voltage set accuracy |
|
± 2 % |
|
Regulation |
Input variation
Load variation (10 100%)
Single output models
Dual/ triple output models |
± 0.3 % max.
± 1.0 % max.
± 5 % max. |
| Minimum load (only triple output models) |
|
10 % (main output) |
| Ripple and noise (20 MHz Bandwidth) |
3.3 & 5 VDC output models:
other models: |
< 1.5 % of Vout
< 1.0 % of Vout |
| Current limitation |
|
120 180 % fold back |
| Short circuit protection |
|
hiccup mode, indefinite (automatic recovery) |
| Maximum capacitive load |
|
470 50'000 µF depending on model |
| Temperature ranges |
Operating
Power derating above 50°C
Storage (non operating) |
25 °C.+71 °C ambient temp. max.
3.75 %/°C
40 °C.+85 °C |
| Temperature coefficient |
|
0.02 % / °C |
| Efficiency |
|
72 80 % (depending on model) |
| Humidity (non condensing) |
|
95 % rel max. |
| Switching frequency |
|
100 kHz typ. (Puls width modulation PWM) |
| Hold-up time |
|
40 ms min. ( Vin 115...230 VAC) |
| Isolation voltage |
Input/ Output |
3'000 VAC |
| Reliability /calculated MTBF (MIL-HDBK-217E) |
|
> 660'000 h @ 25°C |
| EMI / RFI conducted |
|
EN 55022, class B, FCC part 15, level B |
| EMC compliance |
Electrostatic discharge ESD
RF field susceptibility
Electrical fast transients/bursts on mainsline |
IEC / EN 61000-4-2 level 2 4 kV / 8 kV
IEC / EN 61000-4-3 level 4 3 V/m
IEC / EN 61000-4-4 level 4 1 kV |
| Safety Class II (only 30 watt models) |
|
to IEC / EN 60536 |
| Safety standards |
|
UL 1950, IEC 60950, EN 60950 |
| Safety approval |
|
cUL /UL File E188913 |
| Case material |
|
Plastic resin + Fiberglass
(flammability to UL 94-V0) |
TML10105 Data Sheet
