Position: Home  > All Categories> Integrated Circuits (ICs) > TLS24310

TLS24310

Features: ` Current-Bias/Current-Sense Architecture` Fabricated Using LinIMPACT-C™ BiCMOS Technology` Operates From a Single 5-V Supply (±10%)` Low-Power Idle Mode` Single-Ended Input to Reader With One Side Grounded` True Differential Read Output` Wide Magnetoresistive (MR) Resistor [R(MR)]...

product image

TLS24310 Picture
See larger image
SeekIC No. : 004522152 Detail

TLS24310: Features: ` Current-Bias/Current-Sense Architecture` Fabricated Using LinIMPACT-C™ BiCMOS Technology` Operates From a Single 5-V Supply (±10%)` Low-Power Idle Mode` Single-Ended Input to Reade...

TLS24310 Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
TLS24310
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2025/1/11

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

`  Current-Bias/Current-Sense Architecture
`  Fabricated Using LinIMPACT-C™ BiCMOS Technology
`  Operates From a Single 5-V Supply (±10%)
`  Low-Power Idle Mode
`  Single-Ended Input to Reader With One Side Grounded
`  True Differential Read Output
`  Wide Magnetoresistive (MR) Resistor
   [R(MR)] Range From 10 to 40
`  MR-Head Bias Current [II(BIAS)]
   Programmable From 7 mA to 17 mA
`  Buffered-Head-Voltage [V(BH)] Monitor
`  Gain: 230 V/V at R(MR) = 20
`  Bandwidth:
   65 MHz at 1 dB [R(MR) = 20 ]
   140 MHz at 3 dB [R(MR) = 20 ]
`  Equivalent Input Noise = 0.55 nV/Hz at R(MR) = 20
`  Write-Head Current Programmable From 10 mA to 35 mA (Base to Peak)
`  Write-Current Rise/Fall Time = 3.7 ns
   LI(TF) (Head Only) = 180 nH
   RI(TF) = 15 , L(lead) = 50 nH
   II(W) = 25 mA
`  Fast Recovery Times:
   Write to Read = 0.8 s (BHV/IBON = L)
   Read to Write = 50 ns
`  Output Capacitance = 8.5 pF for Write
`  Multichannel Servo Write:
   Upper or Lower Half Channels
   Every Two Channels
   All Channels
`  Read-Fault (RUS), Write-Fault (WUS), and Idle-Fault (IUS) Detection
`  MR-Head Open Protection and MR-Head
   Short Detection Available (Metal Option, Disabled)
`  Thermal-Asperity Detection Available (Metal Option, Disabled)
`  Pseudo-ECL (PECL) Differential-Write-Data (WDX and WDY) Inputs
`  Write Data Divided-by-2 (FF) Circuit Available (Metal Option, Disabled)
`  Channel Separation 70 dBa at f = 25 MHz
`  Power-Supply Rejection Ratio (PSRR)
   50 dB at 25 MHz (Input Referred)
`  MR Bias On During Write Mode; Otherwise,Programmable On/Off
`  Input Control Lines:
   Head Select HS (2 Channel) or HS0 HS2 (6 Channel) With Internal Pullup Resistors
   R/W With Internal Pullup Resistor
    CS With Internal Pullup Resistor
   BHV/IBON With Internal Pulldown Resistor
`  Packaged in 30-Pin (2 Channel) and 38-Pin
   (6 Channel) Plastic TSSOP Packages
`  Optimized for Package-On-Arm Applications 


Pinout

Connection Diagram




Specifications

Supply voltage range, VCC (see Note 1) . . . . . . .  . . . . . . .  . . . . 0.3 V to 6 V
Input voltage range, VI: Digital . . . . . . . . . . . . . . .  .. . . 0.3 V to VCC + 0.3 V
                                       FLT/SE . . . . . . . . . . . . . . . . . . . . .. . . . . 0.3 V to 8 V
                                       MR head . . . . . . . . . . . . . . . . .. . . . . . 0.3 V to 1.5 V
Write-head output voltage range, VO . . . . . . . . . . . . . . 0.3 V to VCC + 0.3 V
Write current, II(W), base to peak . . . . . . . . . . . . . . . . .  . . . . . . . .. . . . 60 mA
MR-head-bias current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 35 mA
Low-level output current, IOL, at RDX or RDY . . . . . . . . . .  . . . . . . . . . 10 mA
High-level output current, IOH, at FLT/SE . . . . . . . . . . . . . . .  . . . . . . . . 12 mA
Continuous total dissipation . . . . . . . . . .. . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . .  . . . . 55°C to 150°C
Operating virtual junction temperature, TJ . . . . . . .. . . . . . . . . . . .  . . . 150°C

† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTE 1: All voltage values are with respect to GND


Description

The TLS24302 and TLS24306 are read/write BiCMOS preamplifiers designed for use with magnetoresistive (MR)/thin- ilm (TF) recording heads. The MR element is used for reading and the inductive thin-film section of the head is used  or writing. The TLS24302 and TLS24306  preamplifiers implement a current-bias/current-sense architecture. Both have a single-ended read  nput with a fully differential read (RDX, RDY) output that operates from a single 5-V supply.

The write-head current II(W) and MR-head bias current II(BIAS) are programmable using external resistors. Recovery time is reduced by holding BHV/IBON low during the write mode. Multichannel servo write is achieved by taking FLT/SE higher than VCC by at least 1.2 V. An optional booster circuit of TLS24302 and TLS24306  can be used to achieve higher operating frequencies.

A fault terminal (FLT/SE) goes low when the WDX/WDY input frequency is low, a head is shorted or open, there is no write current (Ix or Iy), or if VCC is low. Additionally, the TLS24302 and TLS24306  preamplifiers provide an optional thermal-asperity detection circuit that can be enabled by using an optional metal mask during the fabrication process.Table 1 lists the functions that can be changed by a custom metal mask during the fabrication process. Contact your local Texas Instruments (TI) sales office or representative for further information.The TSSOP packages optimize the preamplifiers for package-on-arm applications.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Isolators
HCPL062N
HCPL316J
Line Protection, Backups
BX0023
A20B-1008-0550
Filters
PICO2205A
PICO2204A
Potentiometers, Variable Resistors
RV24YN
WXD4-23-3W
Fans, Thermal Management
3610ML-05W-B49
1608KL-05W-B39
LED Products
LM24P20
KCG057QV1DB-G770
View more