DescriptionThe TLP836 is designed as toshiba photointerrupter infrared LED and phototransistor. Typical applications include still camera, video camera, floppy disk drive and small sized personal OA equipment.TLP836 has four features. (1)Very small package. (2)Printed circuit board direct mounting...
TLP836: DescriptionThe TLP836 is designed as toshiba photointerrupter infrared LED and phototransistor. Typical applications include still camera, video camera, floppy disk drive and small sized personal OA...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The TLP836 is designed as toshiba photointerrupter infrared LED and phototransistor. Typical applications include still camera, video camera, floppy disk drive and small sized personal OA equipment.
TLP836 has four features. (1)Very small package. (2)Printed circuit board direct mounting type. (3)Gap 1mm. (4)High resolution which means the slit width would be 0.15mm (infrared LED side) and 0.1mm phototransistor side. Those are all the main features.
Some absolute maximum ratings of TLP836 have been concluded into several points as follow. (1)Its forward current would be 50mA. (2)Its forward current derating would be -0.67mA/°C. (3)Reverse voltage would be 5V. (4)Its collector to emitter voltage would be 35V. (5)Its emitter to collector voltage would be 5V. (6)Its collector power dissipation would be 75mW. (7)Its collector power dissipation derating would be -1mA/°C. (8)Its collector current would be 20mA. (9)Its operating temperature range would be from -25°C to 85°C. (10)Its storage temperature range would be from -40°C to 100°C. (11)Its soldering temperature would be 260°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.
Also some electrical characteristics of TLP836 are concluded as follow. (1)Its forward voltage would be min 1V and typ 1.15V and max 1.3V. (2)Its reverse current would be max 10uA. (3)Its peak emission wavelength would be typ 940nm. (4)Its dark current would be max 0.1uA. (5)Its peak sensitivity wavelength would be typ 800nm. (6)Its current transfer ratio would be min 0.27% and typ 1.2%. (7)Its collector to emitter saturation voltage would be max 0.4V. (8)Its switching time would be typ 4us for rise time and would be typ 5us for fall time.
It should be noted that the information contained herein is presented only as a guide for the applications of toshiba products. No responsibility is assumed by toshiba sorporation for any infringements of implication or otherwise under any intellectual property or other rights of toshiba corporation or others. And so on. If you have any question or suggestion or want to know more information of TLP836 please contact us for details. Thank you!