TLP832

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).

Note 1: At the location of 1.5mm from the resin package bottom

The TLP832(F) photointerrupter consists of a GaAs infrared LED and an Si phototransistor.

Housed in a short− lead package, the TLP832 is ideal for automatic mounting.

• Designed for direct mounting on printed circuit boards (positioning pins included).
• Short leads enabling automatic mounting : Lead length 3.4mm ± 0.3mm
• Board thickness: 1.6mm or less
• Gap: 5mm
• Resolution: Slit width = 0.5mm
• High current transfer ratio: IC/IF = 5% (min)
• High temperature operation: Topr = 95 (max)
• High response speed: tr, tf = 15s (typ.)
• Detector impermeable to visible light
• package material: Polybutylene terephthalate (UL94V−0, black)