TLP814

The TLP814  is designed as toshiba photointerrupter infrared LED and phototransistor.

TLP814 has five features. (1)Very small package. (2)High resolution slit width 0.4mm. (3)Gap 1.5mm. (4)Current transfer ratio is min 2%. (5)Directly mountable on PCB using the stand off of lead. Those are all the main features.

Some absolute maximum ratings of TLP814 have been concluded into several points as follow. (1)Its forward current would be 50mA. (2)Its forward current derating would be -0.67mA/°C. (3)Reverse voltage would be 5V. (4)Its collector to emitter voltage would be 35V. (5)Its emitter to collector voltage would be 5V. (6)Its collector power dissipation would be 75mW. (7)Its collector power dissipation derating would be -1mW/°C. (8)Its collector current would be 20mA. (9)Its operating temperature range would be from -25°C to 85°C. (10)Its storage temperature range would be from -40°C to 100°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of TLP814 are concluded as follow. (1)Its forward voltage would be min 1V and typ 1.15V and max 1.3V. (2)Its reverse current would be max 10uA. (3)Its peak emission wavelength would be typ 940nm. (4)Its dark current would be max 0.1uA. (5)Its peak sensitivity wavelength would be typ 800nm. (6)Its current transfer ratio would be min 2% and typ 5%. (7)Its collector to emitter saturation voltage would be typ 0.1V and max 0.4V. (8)Its rise and fall time would be typ 50us.

It should be noted that the information contained herein is presented only as a guide for the applications of toshiba products. No responsibility is assumed by toshiba sorporation for any infringements of implication or otherwise under any intellectual property or other rights of toshiba corporation or others. And so on. If you have any question or suggestion or want to know more information of TLP814 please contact us for details. Thank you!