DescriptionThe TLP813 is a PWB direct mounting type photointerrupter with an GaAs infrared LED and a silicon phototransistor incorporated.TLP813 has five features. (1)Printed wiring board direct mounting type (with a locating pin). (2)Gap 2.2mm. (3)High resolution slit width 0.2 x 2.0mm (the oblon...
TLP813: DescriptionThe TLP813 is a PWB direct mounting type photointerrupter with an GaAs infrared LED and a silicon phototransistor incorporated.TLP813 has five features. (1)Printed wiring board direct mou...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The TLP813 is a PWB direct mounting type photointerrupter with an GaAs infrared LED and a silicon phototransistor incorporated.
TLP813 has five features. (1)Printed wiring board direct mounting type (with a locating pin). (2)Gap 2.2mm. (3)High resolution slit width 0.2 x 2.0mm (the oblong slit). (4)Current transfer ratio would be min 2.5%. (5)The detector side is of visible light cut type. Those are all the main features.
Some absolute maximum ratings of TLP813 have been concluded into several points as follow. (1)Its forward current would be 50mA. (2)Its forward current derating would be -0.33mA/°C. (3)Reverse voltage would be 5V. (4)Its collector to emitter voltage would be 35V. (5)Its emitter to collector voltage would be 5V. (6)Its collector power dissipation would be 75mW. (7)Its collector power dissipation derating would be -1mW/°C. (8)Its collector current would be 50mA. (9)Its operating temperature range would be from -30°C to 85°C. (10)Its storage temperature range would be from -40°C to 100°C. (11)Its soldering temperature would be 260°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.
Also some electrical characteristics of TLP813 are concluded as follow. (1)Its forward voltage would be min 1V and typ 1.15V and max 1.3V. (2)Its reverse current would be max 10uA. (3)Its peak emission wavelength would be typ 940nm. (4)Its dark current would be max 0.1uA. (5)Its peak sensitivity wavelength would be typ 870nm. (6)Its current transfer ratio would be min 2.5% and typ 50%. (7)Its collector to emitter saturation voltage would be typ 0.15V and max 0.4V. (8)Its rise and fall time would be typ 6us.
It should be noted that the information contained herein is presented only as a guide for the applications of toshiba products. No responsibility is assumed by toshiba sorporation for any infringements of implication or otherwise under any intellectual property or other rights of toshiba corporation or others. And so on. If you have any question or suggestion or want to know more information of TLP813 please contact us for details. Thank you!