TLP810

The TLP810 is designed as toshiba photointerrupter infrared LED and phototransistor. Typical applications include motor rotation and IRIS detection for camera and truck detection of micro floppy disk drive.

TLP810 has four features. (1)Very small package. (2)High resolution slit width 0.4mm. (3)Gap 1mm. (4)Directly mountable on PCB using the stand off of lead. Those are all the main features.

Some absolute maximum ratings of TLP810 have been concluded into several points as follow. (1)Its forward current would be 50mA. (2)Its forward current derating would be -0.67mA/°C. (3)Reverse voltage would be 5V. (4)Its collector to emitter voltage would be 35V. (5)Its emitter to collector voltage would be 5V. (6)Its collector power dissipation would be 75mW. (7)Its collector power dissipation derating would be -1mW/°C. (8)Its collector current would be 20mA. (9)Its operating temperature range would be from -25°C to 85°C. (10)Its storage temperature range would be from -40°C to 100°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of TLP810 are concluded as follow. (1)Its forward voltage would be min 1V and typ 1.15V and max 1.3V. (2)Its reverse current would be max 10uA. (3)Its capacitance would be typ 30pF. (4)Its dark current would be max 0.1uA. (5)Its capacitance would be typ 13pF. (6)Its current transfer ratio would be min 5% and max 30%. (7)Its collector to emitter saturation voltage would be typ 0.1V and max 0.4V. (8)Its rise and fall time would be typ 50us.

It should be noted that the information contained herein is presented only as a guide for the applications of toshiba products. No responsibility is assumed by toshiba sorporation for any infringements of implication or otherwise under any intellectual property or other rights of toshiba corporation or others. And so on. If you have any question or suggestion or want to know more information of TLP810 please contact us for details. Thank you!