Features: SpecificationsDescription The TOSHIBA SSOP coupler TLP3914 (telecommunication, programmable controllers, mos fet gate driver )is a small outline coupler, suitable for surface mount assembly. The TLP3914 consists of a GaAℓAs light emitting diode, optically coupled to a series connec...
TLP3914: Features: SpecificationsDescription The TOSHIBA SSOP coupler TLP3914 (telecommunication, programmable controllers, mos fet gate driver )is a small outline coupler, suitable for surface mount assembl...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: · Peak Off-State Voltage : 400 V (min)· Trigger LED Current : 15 mA (max) (TLP3021(S)) 1...
The TOSHIBA SSOP coupler TLP3914 (telecommunication, programmable controllers, mos fet gate driver )is a small outline coupler, suitable for surface mount assembly. The TLP3914 consists of a GaAℓAs light emitting diode, optically coupled to a series connected photo diode array which is suitable for MOS FET gate drive.
The features of TLP3914 are 4 pin SSOP (SSOP4)= 1.8 mm high, 1.27 mm pitch, Open Voltage=7V (min), Short Current=20A (min), Isolation Voltage=1500Vrms (min).
The absolute maximum ratings (Ta = 25°C) of TLP3914 are Storage Temperature Range(Tstg)=−55~125°C, DETECTOR(Forward Current IFD /Reverse Voltage VRD/Junction Temperature Tj)=50A/10V/125°C, Operating Temperature Range(Topr)=−40~85 °C, Lead Soldering Temperature (10 s)(Tsol)=260 °C, Isolation Voltage (AC, 1 min., R.H. 60%)(BVS)=1500 Vrms( Device considered a two terminal device: Pins 1 and 2 shorted together and pins 3 and 4 shorted together. (note: Using continuously under heavy loads (e.g. the application of high temperature/current/volt=-age and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e.operating temperature /current/voltage, etc.) are within the abolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). )
The TLP3914 is sensitive to electrostatic discharge. When using this device, please ensure that all tools and equipment are earthed. The Recommended Operating Conditions( Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. )