Features: Input Threshold Current : IF=5mA(MAX) Supply Current(ICC) : 11mA(MAX) Supply Voltage(VCC) : 10~35V Output Current(IO) : ±2.0A(MAX) Switching Time(tpLH/tpHL) : 0.5s(MAX) Isolation Voltage : 2500Vrms UL Recognized : UL1577,File No.E67349 Option(D4) VDE Approved : DIN VDE0884/06.92 Certifi...
TLP250(INV): Features: Input Threshold Current : IF=5mA(MAX) Supply Current(ICC) : 11mA(MAX) Supply Voltage(VCC) : 10~35V Output Current(IO) : ±2.0A(MAX) Switching Time(tpLH/tpHL) : 0.5s(MAX) Isolation Voltage ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Input Threshold Current : IF=5mA(MAX)
Supply Current(ICC) : 11mA(MAX)
Supply Voltage(VCC) : 10~35V
Output Current(IO) : ±2.0A(MAX)
Switching Time(tpLH/tpHL) : 0.5s(MAX)
Isolation Voltage : 2500Vrms
UL Recognized : UL1577,File No.E67349
Option(D4)
VDE Approved : DIN VDE0884/06.92 Certificate No.76823
Maximum Operating Insulation Voltage : 630VPK
Highest Permissible Over Voltage : 4000VPK
(Note):When a VDE0884 approved type is needed,
Please designate the "Option(D4)"
Creepage Distance : 6.4mm(MIN)
Clearance : 6.4mm(MIN)
CHARACTERISTIC |
SYMBOL |
RATING |
UNIT | |||
LED |
Forward Current |
IF |
20 |
mA | ||
Forward Current Derating (Ta70) |
IF /Ta |
−0.36 |
mA /°C | |||
Peak Transient Forward Current (Note 1) |
IFPT |
1 |
A | |||
Reverse Voltage |
VR |
5 |
V | |||
Junction Temperature |
Tj |
125 |
°C | |||
DETECTOR |
"H" Peak Output Current |
PW 2.5s , f15 kHz |
(Note 2) |
IOPH |
−1.5 |
A |
PW1.0s , f15 kHz |
-2.0 | |||||
"L" Peak Output Current |
PW 2.5s , f15 kHz |
IOPL |
+1.5 |
A | ||
PW1.0s , f15 kHz |
+2.0 | |||||
Output Voltage |
(Ta70°C) |
VO |
35 |
V | ||
(Ta=85°C) |
24 | |||||
Supply Voltage |
(Ta70°C) |
VCC |
35 |
V | ||
(Ta=85°C) |
24 | |||||
Output Voltage Derating (Ta70°C) |
VO /Ta |
−0.73 |
V /°C | |||
Supply Voltage Derating (Ta70°C) |
VCC /Ta |
−0.73 |
V /°C | |||
Junction Temperature |
Tj |
125 |
°C | |||
Operating Frequency (Note 3) |
f |
25 |
kHz | |||
Operating Temperature Range |
Topr |
−20~85 |
°C | |||
Storage Temperature Range |
Tstg |
−55~125 |
°C | |||
Lead Soldering Temperature(10s) |
Tsol |
260 |
°C | |||
Isolation Voltage (AC,1min., R.H. 60%,Ta=25°C) (Note 4) |
BVS |
2500 |
Vrms |
(Note 1) : Pulse width PW1s,300pps
(Note 2) : Exporenential Waveform
(Note 3) : Exporenential Waveform IOPH−1.0A (2.5s) , IOPL+1.0A (2.5s)
(Note 4) : Device considerd a two terminal device : pins 1,2,3 and 4 shorted together and pins 5,6,7 and 8 shorted together.
(Note 5) : A ceramic capacitor(0.1F) should be connected from pin 8 to pin 5 to stabilize the operation of the high gain linear amplifier.Failure to provide the bypassing may impair the switching proparty.The total lead length between capacitor and coupler should not exceed 1cm.
The TOSHIBA TLP250(INV) consists of a GaAlAs light emitting diode and a integrated photodetector.
This unit is 8-lead DIP.
TLP250(INV) is suitable for gate driving circuit of IGBT or power MOS FET.