Features: · Qualified for Automotive Applications· Output Voltage 5 V ± 2%· Very Low Current Consumption· Power-On and Undervoltage Reset· Reset Low-Level Output Voltage < 1 V· Very Low Dropout Voltage· Short-Circuit Proof· Reverse-Polarity Proof· ESD Protection > 6 kVPinoutSpecifications ...
TLE4275-Q1: Features: · Qualified for Automotive Applications· Output Voltage 5 V ± 2%· Very Low Current Consumption· Power-On and Undervoltage Reset· Reset Low-Level Output Voltage < 1 V· Very Low Dropout V...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
MIN | MAX | UNIT | ||
VI Input voltage range(2) | IN | 42 | 45 | V |
DELAY | 0.3 | 7 | ||
VO Output voltage range | OUT | 1 | 16 | V |
RESET | 0.3 | 25 | ||
II Input current | DELAY | ±2 | mA | |
IO Output current | RESET | ±5 | mA | |
qJA Package thermal impedance, junction to free air(3) (4) | 21.5 | °C/W | ||
TJ Operating junction temperature range | 40 | 150 | °C | |
TJ Operating junction temperature range | 65 | 150 | °C |
The TLE4275-Q1 is a monolithic integrated low-dropout voltage regulator offered in a 5-pin TO package. An input voltage up to 45 V is regulated to VOUT = 5 V (typ). The device can drive loads up to 450 mA and is short-circuit nproof. At overtemperature, the TLE4275 is turned off by the incorporated temperature protection. A reset signal is generated for an output voltage, VOUT,rt, of 4.65 V (typ). The reset delay time can be programmed by the external delay capacitor.
The input capacitor, CIN, compensates for line fluctuation. Using a resistor of approximately 1 W, in series with CIN, dampens the oscillation of input inductivity and input capacitance. The output capacitor, COUT, stabilizes the regulation circuit. Stability is specified at COUT ³ 22 mF and ESR £ 5 W, within the operating temperature range.
The control amplifier compares a reference voltage to a voltage that is proportional to the output voltage and drives the base of the series transistor via a buffer. Saturation control as a function of the load current prevents any oversaturation of the power element. The TLE4275-Q1 also incorporates a number of internal circuits for protection against:
· Overload
· Overtemperature
· Reverse polarity