TLE2142CP

Number of Channels : 2
Packaging : Tube
Shutdown : No
Mounting Style : Through Hole
Package / Case : PDIP-8
Maximum Operating Temperature : + 70 C
Common Mode Rejection Ratio (Min) : 85 dB
Operating Supply Voltage : 44 V
Input Offset Voltage : 1.9 mV
Output Current : 15 mA
Input Bias Current (Max) : - 2 uA
Slew Rate : 45 V/us


Pinout




Description

The TLE2142CP is designed as one kind of high performance, internally compensated operational amplifiers built using texas instruments complementary bipolar excalibur process.

TLE2142CP has ten features. (1)Low noise 10Hz for 15nV/Hz and 1KHz for 10.5nV/Hz. (2)10000pF load capability. (3)20mA min short circuit output current. (4)27V/us min slew rate. (5)High gain-bandwidth product 5.9MHz. (6)Low Vio 500uV max at 25°C. (7)Single or split supply would be from 4V to 44V. (8)Fast settling time 340ns to 0.01% and 400ns to 0.01%. (9)Saturation recovery 150ns. (10)Large output swing would be from Vcc- +0.1V to Vcc+ -1V. Those are all the main features.

Some absolute maximum ratings about TLE2142CP have been concluded into several points as follow. (1)Its supply voltage Vcc+ would be 22V. (2)ts supply voltage Vcc- would be -22V. (3)Its differential input voltage would be +/-44V. (4)Its input voltage range any input would be from Vcc+ to Vcc- -0.3V. (5)Its output current would be +/-80mA. (6)Its total current into Vcc+ would be 80mA. (7)Its total current out of Vcc- would be 80mA. (8)Its duration of short-circuit current at 25°C would be unlimited. (9)Its package thermal impedance would be 84.6°C/W. (10)Its storage temperature range would be from -65°C to 150°C. (11)Its lead temperature 1,6mm (1/16 inch) from case for 10 seconds would be 260°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of TLE2142CP at Vcc=5V are concluded as follow. (1)Its positive slew rate would be typ 45V/us. (2)Its negative slew rate would be typ 42V/us. (3)Its setting time would be typ 0.16us to 0.1% and would be typ 0.22us to 0.01%. (4)Its equivalent input noise voltage would be typ 15nV/Hz at f=10Hz and would be typ 10.5nV/Hz at f=1KHz. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!

Parameters:

Technical/Catalog Information	TLE2142CP
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	General Purpose
Number of Circuits	2 - Dual
Package / Case	8-DIP (300 mil)
Slew Rate	45 V/s
Gain Bandwidth Product	5.9MHz
Current - Supply	6.9mA
Current - Output / Channel	50mA
Voltage - Supply, Single/Dual (±)	4 V ~ 44 V, ±2 V ~ 22 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	700nA
Operating Temperature	0°C ~ 70°C
Voltage - Input Offset	290V
Drawing Number	296; 4040082; P; 8
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TLE2142CP TLE2142CP 296 10464 5 ND 296104645ND 296-10464-5