Features: ` 16 Channels, Constant Current Sink Output with On/Off Control` 35-mA Capability (Constant Current Sink)` 10-ns High-Speed Constant Current Switching Transient Time` Low On-Time Error` LED Power-Supply Voltage up to 17 V` VCC = 3.0 V to 5.5 V` Constant Current Accuracy: Channel-to-Chann...
TLC5928: Features: ` 16 Channels, Constant Current Sink Output with On/Off Control` 35-mA Capability (Constant Current Sink)` 10-ns High-Speed Constant Current Switching Transient Time` Low On-Time Error` LE...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETER | TLC5928 | UNIT | |
VCC Supply voltage: VCC | 0.3 to +6.0 | V | |
IOUT Output current (dc) | OUT0 to OUT15 | 40 | mA |
VIN Input voltage range | SIN, SCLK, LAT, BLANK, IREF | 0.3 to VCC + 0.3 | V |
VOUT Output voltage range | SOUT | 0.3 to VCC + 0.3 | V |
OUT0 to OUT15 | 0.3 to +18 | V | |
TJ(MAX) Operating junction temperature | +150 | ||
TSTG Storage temperature range | 55 to +150 | ||
ESD rating | Human body model (HBM) | 2 | kV |
Charged device model (CDM) | 500 | V |
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for xtended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not supported.
(2) All voltage values are with respect to network ground terminal.
The TLC5928 is a 16-channel, constant current sink LED driver. Each channel can be turned on/off by writing serial data to an internal register. The constant current value of all 16 channels is set by a single external resistor.
The TLC5928 has two error detection circuits: one for LED open detection (LOD) and one for a pre-thermal warning (PTW). LOD detects a broken or disconnected LED and LEDs shorted to GND while the constant current output is on. PTW indicates a high temperature condition.