Features: ` 16 Channels` Drive Capability 0 to 80 mA (Constant-Current Sink)` Constant Current Accuracy: ±1% (typical)` Serial Data Interface` Fast Switching Output: Tr / Tf = 10ns (typical)` CMOS Level Input/Output` 30 MHz Data Transfer Rate` VCC = 3.0 V to 5.5 V` Operating Temperature = 40 to 85...
TLC5924: Features: ` 16 Channels` Drive Capability 0 to 80 mA (Constant-Current Sink)` Constant Current Accuracy: ±1% (typical)` Serial Data Interface` Fast Switching Output: Tr / Tf = 10ns (typical)` CMOS L...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
TLC5924 | UNIT | ||
VCC Supply voltage(2) | 0.3 to 6 | V | |
VUP Pre-charge voltage | 0.3 to 16 | V | |
IO Output current (dc) | I(OUT0) to I(OUT15) | 90 | mA |
VI Input voltage range(2) | V(BLANK), V(XLAT), V(SCLK), V(SIN), V(MODE), V(IREF) | 0.3 to VCC + 0.3 | V |
VO Output voltage range(2) | V(SOUT), V(XERR) | 0.3 to VCC + 0.3 | V |
V(OUT0) to V(OUT15) | -0.3 to VUP | V | |
ESD rating | HBM (JEDEC JESD22-A114, Human Body Model) | 2 | kV |
CDM (JEDEC JESD22-C101, Charged Device Model) | 500 | V | |
Tstg Storage temperature range | 40 to 150 | ||
Power dissipation rating at (or above) TA = 25(3) |
HTSSOP (DAP) | 42.54 | mW/ |
QFN (RHB) | 27.86 | mW/ |
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to network ground terminal.
(3) See SLMA002 for more information about PowerPAD™
The TLC5924 is a 16 channel constant-current sink driver. Each channel has a On/Off state and a 128-step adjustable constant current sink (dot correction). The dot correction adjusts the brightness variations between LED, LED channels and other LED drivers. Both dot correction and On/Off state are accessible via a serial data interface. A single external resistor sets the maximum current of all 16 channels.
Each constant-current output of TLC5924 has a pre-charge FET that enables an improvement in image quality of the dynamic-drive LED display.
The TLC5924 features two error information circuits.
The LED open detection (LOD) of TLC5924 indicates a broken or disconnected LED at an output terminal. The thermal error flag (TEF) indicates an over-temperature condition.