Features: Stable Driving 1000 pF Capacitive Loads
Gain Bandwidth Product . . . 4.7 MHz
Slew Rate . . . 2.5 V/µs
High Output Drive Capability . . . ±50 mA
Calibration Time . . . 300 ms
Characterized From 55 to 125
Available in Q-Temp Automotive
HighRel Automotive Applications
Configuration Control / Print Support
Qualification to Automotive Standards PinoutSpecificationsSupply voltage, VDD+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±7 V
Input voltage range, VI(any input, see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.3 V to 7 V
Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±5 mA
Output current, IO (each output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±100 mA
Total current into VDD+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±100 mA
Total current out of VDD/GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..±100 mA
Electrostatic discharge (ESD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 2 kV
Duration of short-circuit current at (or below) 25(see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See Dissipation Rating Table
Operating free-air temperature range, TA: TLC4502C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0to 70
TLC4502I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40to 125
TLC4502Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40to 125
TLC4502M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55to 125
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65to 150
Case temperature for 60 seconds, TC: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260
DescriptionThe TLC4501A are the highest precision CMOS single supply rail-to-rail operational amplifiers available today. The input offset voltage is 10
µV typical and 40
µV maximum. This exceptional precision of TLC4501A, combined with a 4.7-MHz bandwidth, 2.5-V/
µs slew rate, and 50-mA output drive, is ideal for multiple applications including: data acquisition systems, measurement equipment, industrial control applications, and portable digital scales.
These amplifiers TLC4501A feature self-calibrating circuitry which digitally trims the input offset voltage to less than 40
µV within the first 300 ms of operation. The offset is then digitally stored in an integrated successive approximation register (SAR). Immediately after the data is stored, the calibration circuitry of TLC4501A effectively drops out of the signal path, shuts down, and the device functions as a standard operational amplifier.