TLC074AIN

Maximum Operating Temperature : + 125 C
Common Mode Rejection Ratio (Min) : 80 dB
Packaging : Tube
Number of Channels : 4
Shutdown : No
Mounting Style : Through Hole
Package / Case : PDIP-14
Operating Supply Voltage : 16 V
Input Bias Current (Max) : 50 pA
Input Offset Voltage : 1.4 mV
Slew Rate : 16 V/us
Output Current : 57 mA


Features:

* Wide Bandwidth . . . 10 MHz
* High Output Drive
− IOH . . . 57 mA at VDD − 1.5 V
− IOL . . . 55 mA at 0.5 V
* High Slew Rate
− SR+ . . . 16 V/s
− SR− . . . 19 V/s
* Wide Supply Range . . . 4.5 V to 16 V
* Supply Current . . . 1.9 mA/Channel
* Ultralow Power Shutdown Mode I_DD . . . 125 A/Channel
* Low Input Noise Voltage . . . 7 nVHz
* Input Offset Voltage . . . 60 V
* Ultra-Small Packages
− 8 or 10 Pin MSOP (TLC070/1/2/3)




Pinout




Specifications

Supply voltage, V_DD (see Note 1). . . . . . . . . . . . . . . . . . . . . . . . 17 V
Differential input voltage range, V_ID. . . . . . . . . . . . . . . . . . . . .±V_DD
Continuous total power dissipation. . . .See Dissipation Rating Table
Operating free-air temperature range, T_A: C suffix. . . . . .0 to 70
I suffix. . . . . . . . . . . . . .−40 to 125
Maximum junction temperature, T_J. . . . . . . . . . . . . . . . . . . . . .150
Storage temperature range, T_stg. . . . . . . . . . . . . . . −65 to 150
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . 260
† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: All voltage values, except differential voltages, are with respect to GND .

Description

The first members of TI's new BiMOS general-purpose operational amplifier family are the TLC07x. The BiMOS family concept is simple: provide an upgrade path for BiFET users who are moving away from dual-supply to single-supply systems and demand higher AC and dc performance. With performance rated from 4.5 V to 16 V across commercial (0 to 70) and an extended industrial temperature range (−40°C to 125°C), BiMOS suits a wide range of audio, automotive, industrial and instrumentation applications. Familiar features like offset nulling pins, and new features like MSOP PowerPAD packages and shutdown modes, enable higher levels of performance in a variety of applications.

Developed in TI's patented LBC3 BiCMOS process, the new BiMOS amplifiers combine a very high input impedance low-noise CMOS front end with a high-drive bipolar output stage, thus providing the optimum performance features of both. AC performance improvements over the TL07x BiFET predecessors include a bandwidth of 10 MHz (an increase of 300%) and voltage noise of 7 nV/Hz (an improvement of 60%). DC improvements include a factor of 4 reduction in input offset voltage down to 1.5 mV (maximum) in the standard grade, and a power supply rejection improvement of greater than 40 dB to 130 dB. Added to this list of impressive features is the ability to drive ±50-mA loads comfortably from an ultrasmall-footprint MSOP PowerPAD package, which positions the TLC07x as the ideal high-performance general-purpose operational amplifier family.

Parameters:

Technical/Catalog Information	TLC074AIN
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	General Purpose
Number of Circuits	4 - Quad
Package / Case	14-DIP (300 mil)
Slew Rate	19 V/s
Gain Bandwidth Product	10MHz
Current - Supply	2.1mA
Current - Output / Channel	57mA
Voltage - Supply, Single/Dual (±)	4.5 V ~ 16 V, ±2.25 V ~ 8 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	1.5pA
Operating Temperature	-40°C ~ 125°C
Voltage - Input Offset	390V
Drawing Number	296; 4040049; N; 14, 16, 18, 20
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TLC074AIN TLC074AIN 296 7240 5 ND 29672405ND 296-7240-5