PinoutSpecifications Symbol Parameter Value Unit VS Supply Voltage, VCC - (see note 1) 20 V Vi Input Voltage Range at RESIN -0.3 to 20 V Vi Input Voltage at SENSE : TL7702A (see note 2)TL7705A -0.3 to 6-0.3 to 10 V IOH High-level Output Current at RESET -30 mA I...
TL7712AI: PinoutSpecifications Symbol Parameter Value Unit VS Supply Voltage, VCC - (see note 1) 20 V Vi Input Voltage Range at RESIN -0.3 to 20 V Vi Input Voltage at SENSE : TL7702A (...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Value | Unit |
VS | Supply Voltage, VCC - (see note 1) | 20 | V |
Vi | Input Voltage Range at RESIN | -0.3 to 20 | V |
Vi | Input Voltage at SENSE : TL7702A (see note 2) TL7705A |
-0.3 to 6 -0.3 to 10 |
V |
IOH | High-level Output Current at RESET | -30 | mA |
IOL | Low-level Output Current at RESET | 30 | mA |
Tamb | Operating Free-air Temperature Range : TL77XXAI TL77XXAC |
-25 to 85 0to70 |
oC |
Tstg | Storage Temperature Range | -65 to 150 | oC |
The TL7700A series aremonolithicintegratedcircuit supplyvoltagesupervisorsspecificallydesi-gnedfor use as reset controllers in microcomputer and microprocessor systems. During power-up the device tests the supply voltage and keeps the TL7700A series RESET and RESET outputs active (high and low, respectively) as long as the supply voltage has not reached its nominal voltage value. Taking TL7700A series RESIN low has the same effect.To ensurethat themicrocomputersys-temhasreset, theTL7700Athen initiatesaninternal time delaythat delays the returnof the resetoutputs to their inactivestates. Since the timedelay formost microcomputers and microprocessorsis in theorder of several machine cycles, the device internal time delayis determinedby an external time delay is determined by an external capacitor connected to theCT input (pin 3).
td = 1.3 x 104xCT
Where : CT is in farads (F) and td in seconds (s). In addition, when the supply voltage drops below the nominal value, the outputs will be active until the supply voltage returns to the nominal value. An externalcapacitor(typically0.1µF)mustbeconnected to theREF output (pin 1) to reduce the influence of fast transients in the supply voltage.
The TL7700AI series is characterized for operation from 25oC to 85oC ; theTL7700ACseries is characterized from 0oC to 70oC.