TL074IDR

Output Current :
Mounting Style : SMD/SMT
Packaging : Reel
Input Offset Voltage : 6 mV
Number of Channels : 4
Common Mode Rejection Ratio (Min) : 75 dB
Shutdown : No
Maximum Operating Temperature : + 85 C
Package / Case : SOIC-14
Operating Supply Voltage : 30 V
Input Bias Current (Max) : 200 pA
Slew Rate : 13 V/us


Description

The TL074IDR is one member of the TL074 series.The JFET-input operational amplifiers in the TL07x series are similar to the TL08x series, with low input bias and offset currents and fast slew rate. The low harmonic distortion and low noise make the TL07x series ideally suited for high-fidelity and audio preamplifier applications. Each amplifier features JFET inputs (for high input impedance) coupled with bipolar output stages integrated on a single monolithic chip.

Features of the TL074IDR are:(1)low power consumption; (2)wide common-mode and differential voltage ranges; (3)low input bias and offset currents; (4)output short-circuit protection; (5)low total harmonic distortion.0.003% typ; (6)high input impedance.JFET input stage; (7)internal frequency compensation; (8)latch-up-free operation; (9)high slew rate.13 V/s typ; (10)common-mode input voltage range includes Vcc+.

The absolute maximum ratings of the TL074IDR can be summarized as:(1)operating virtual junction temperature:150;(2)case temperature for 60 seconds: FK package:260;(3)lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: J,JG, or W package:+150;(4)storage temperature range:65 to +150;(5)supply voltage:-18V to +18V.Stresses beyond those listed under "absolute maximum ratings"may cause permanent damage to the device.This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied.Exposure to absolute maximum rating conditions for extended periods may affect device reliability.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.

At present there is not too much information about this model.If you are willing to find more about TL074IDR, please pay attention to our web! We will promptly update the relevant information.

Parameters:

Technical/Catalog Information	TL074IDR
Vendor	Texas Instruments (VA)
Category	Integrated Circuits (ICs)
Packaging	Cut Tape (CT)
Amplifier Type	J-FET
Number of Circuits	4 - Quad
Package / Case	14-SOIC (3.9mm Width), 14-SOL
Slew Rate	13 V/s
Gain Bandwidth Product	3MHz
Current - Supply	1.4mA
Current - Output / Channel	-
Voltage - Supply, Single/Dual (±)	7 V ~ 36 V, ±3.5 V ~ 18 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	65pA
Operating Temperature	-40°C ~ 85°C
Voltage - Input Offset	3000V
Drawing Number	296; 4040047-3; D; 14
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TL074IDR TL074IDR 296 15000 1 ND 296150001ND 296-15000-1