Position: Home  > All Categories> Integrated Circuits (ICs) > TL-SCSI285Y

TL-SCSI285Y

Features: · Fully Matches Parameters for Alternative 2 SCSI Active Termination· Fixed 2.85-V Output· ±1% Maximum Output Tolerance at TJ = 25°C· 0.7-V Maximum Dropout Voltage· 620-mA Output Current· ±2% Absolute Output Variation· Internal Overcurrent Limiting Circuitry· Internal Thermal Overload Pr...

product image

TL-SCSI285Y Picture
See larger image
SeekIC No. : 004522158 Detail

TL-SCSI285Y: Features: · Fully Matches Parameters for Alternative 2 SCSI Active Termination· Fixed 2.85-V Output· ±1% Maximum Output Tolerance at TJ = 25°C· 0.7-V Maximum Dropout Voltage· 620-mA Output Current· ...

TL-SCSI285Y Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
TL-SCSI285Y
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/23

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

· Fully Matches Parameters for Alternative 2 SCSI Active Termination
· Fixed 2.85-V Output
· ±1% Maximum Output Tolerance at TJ = 25°C
· 0.7-V Maximum Dropout Voltage
· 620-mA Output Current
· ±2% Absolute Output Variation
· Internal Overcurrent Limiting Circuitry
· Internal Thermal Overload Protection
· Internal Overvoltage Protection


Pinout

Connection Diagram


Specifications

Continuous input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5 V
Continuous total dissipation (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating virtual junction temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55°C to 150°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .... . . . 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: KC, N, or PW Package . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J Package . . . . . . . . . . . . .  . . . . . . 300°C

† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTE 1: Refer to Figures 1 and 2 to avoid exceeding the design maximum virtual junction temperature; these ratings should not be exceeded. Due to variation in individual device electrical characteristics and thermal resistance, the built-in thermal overload protection may be activated at power levels slightly above or below the rated dissipation.


Description

The TL-SCSI285 is a low-dropout (0.7-V) fixed-voltage regulator specifically designed for small computer systems interface (SCSI) alternative 2 active signal termination. The TL-SCSI285 0.7-V maximum dropout ensures compatibility with existing SCSI systems while providing a wide TERMPWR voltage range. At the same time the ±1% initial tolerance on its 2.85-V output voltage ensures a tighter line driver current tolerance, thereby increasing the system noise margin.

The fixed 2.85-V output voltage of the TL-SCSI285 supports the SCSI alternative 2 termination standard while reducing system power consumption. The 0.7-V maximum dropout voltage brings increased TERMPWR isolation, making the device ideal for battery-powered systems. The TL-SCSI285, with internal current limiting, overvoltage protection, ESD protection, and thermal protection offers designers enhanced system protection and reliability.

When configured as a SCSI active terminator, the TL-SCSI285 low-dropout regulator eliminates the 220-W and the 330-W resistors required for each transmission line with a passive termination scheme, reducing significantly the continuous system power drain. When placed in series with 110-W resistors, the device matches the impedance level of the transmission cable and eliminates reflections.

The TL-SCSI285 is characterized for operation from 0°C to 125°C virtual junction temperature. The TL-SCSI285M is characterized for operation from 55°C to 125°C virtual junction temperature




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Tapes, Adhesives
803
AC452-2
Isolators
HCPL062N
HCPL316J
Integrated Circuits (ICs)
TA8435H
1MB12-140
Fans, Thermal Management
3610ML-05W-B49
1608KL-05W-B39
Sensors, Transducers
GP2Y0D340K
PAN3509DH-TXWA
Hardware, Fasteners, Accessories
MF-A02
LMS700KF07
View more