Features: · High Voltage Precision at ± 2.0%· Active High On/Off Control· Very Low Dropout Voltage 80 mV at 30 mA· Very Low Noise· Very Small SOT-23L or SOT-89 Surface Mount Packages· Internal Thermal Shutdown· Short Circuit ProtectionApplication· Battery Powered Systems· Cellular Telephones· Page...
TK112xxBC: Features: · High Voltage Precision at ± 2.0%· Active High On/Off Control· Very Low Dropout Voltage 80 mV at 30 mA· Very Low Noise· Very Small SOT-23L or SOT-89 Surface Mount Packages· Internal Therm...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The TK112xxB is a low dropout linear regulator with a builtin electronic switch. The internal switch can be controlled by TTL or CMOS logic levels. The device is in the "on" state when the control pin is pulled to a logic high level. An external capacitor can be connected to the noise bypass pin to lower the output noise level to 30 Vrms.
An internal PNP pass transistor TK112xxB is used to achieve a low dropout voltage of 80 mV (typ.) at 30 mA load current. The TK112xxB has a very low quiescent current of 170 A at no load and 1 mA with a 30 mA load. The standby current is typically 100 nA. The internal thermal shut down circuitry limits the junction temperature to below 150 °C. The load current is internally monitored and the device will shut down in the presence of a short circuit or overcurrent condition at the output.