Holding Current (Ih Max)
: 150 mA
Mounting Style
: Through Hole
Maximum Operating Temperature
: + 150 C
Off-State Leakage Current @ VDRM IDRM
: 0.005 mA
Breakover Current IBO Max
: +/- 600 mA
Non Repetitive On-State Current
: 60 A
On-State Voltage
: 3 V at 5 A
Rated Repetitive Off-State Voltage VDRM
: 100 V
Package / Case
: SIP-3
Breakover Voltage VBO
: +/- 125 V
Off-State Capacitance CO
: 33 pF to 90 pF
Specifications
| RATING |
SYMBOL |
VALUE |
UNIT |
'3070
'3080
'3095
'3125
'3135
Repetitive peak off-state voltage, (see Note 1) ' 3145
'3180
'3210
'3250
'3290
'3350 |
VDRM |
± 58
± 65
± 75
±100
±110
±120
±145
±160
±190
±220
±275 |
V |
Non-repetitive peak on-state pulse current (see Notes 2, 3 and 4)
2/10 µs (GR-1089-CORE, 2/10 µs voltage wave shape)
8/20 µs (IEC 61000-4-5, 1.2/50 µs voltage, 8/20 current combination wave generator)
10/160 µs (FCC Part 68, 10/160 µs voltage wave shape)
5/200 µs (VDE 0433, 10/700 µs voltage wave shape)
0.2/310 µs (I3124, 0.5/700 µs voltage wave shape)
5/310 µs (ITU-T K20/21, 10/700 µs voltage wave shape)
5/310 µs (FTZ R12, 10/700 µs voltage wave shape)
5/320 µs (FCC Part 68, 9/720 µs voltage wave shape)
10/560 µs (FCC Part 68, 10/560 µs voltage wave shape)
10/1000 µs (GR-1089-CORE, 10/1000 µs voltage wave shape) |
ITSP |
500
300
250
220
200
200
200
200
160
100 |
A |
Non-repetitive peak on-state current (see Notes 2, 3 and 5)
20 ms (50 Hz) full sine wave
16.7 ms (60 Hz) full sine wave
1000 s 50 Hz/60 Hz a.c. |
ITSM |
55
60
1 |
A |
| Initial rate of rise of on-state current, Exponential current ramp, Maximum ramp value < 200 A |
diT/dt |
400 |
A/µs |
| Junction temperature |
TJ |
-40to+150 |
°C |
| Storage temperature range |
Tstg |
-65to+150 |
°C |
DescriptionThe TISP3xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground. Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or conducted on to the telephone line.
The protector TISP3xxxH3SL consists of two symmetrical voltage-triggered bidirectional thyristors. Overvoltages are initially clipped by breakdown clamping until the voltage rises to the breakover level, which causes the device to crowbar into a low-voltage on state. This low-voltage on state causes the current resulting from the overvoltage to be safely diverted through the device. The high crowbar holding current prevents d.c. latchup as the diverted current subsides.
This TISP3xxxH3SL range consists of eleven voltage variants to meet various maximum system voltage levels (58 V to 275 V). They are guaranteed to voltage limit and withstand the listed international lightning surges in both polarities. These high current protection devices are in a 3-pin single-in-line (SL) plastic package and are supplied in tube pack. For alternative impulse rating, voltage and holding current values in SL packaged protectors, consult the factory. For lower rated impulse currents in the SL package, the 35 A 10/1000 TISP3xxxF3SL series is available.
These monolithic protection devices TISP3xxxH3SL are fabricated in ion-implanted planar structures to ensure precise and matched breakover control and are virtually transparent to the system in normal operation.
TISP3125H3SL Data Sheet
