Features: • Fast response time < 50 mS• 69 x 51 switch matrix, over 3500 switches• Fits Sharp LJ64ZU50/52 directly• Hardcoated neutral density (gray) CP filter• Sealed for environmental resistance• Immune to high or changing ambient light• RS-232C inter...
TIP-3526PCS-8: Features: • Fast response time < 50 mS• 69 x 51 switch matrix, over 3500 switches• Fits Sharp LJ64ZU50/52 directly• Hardcoated neutral density (gray) CP filter• Seal...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Description12.1in Infrared Touch Panel, Fast response time < 50mS, 81 x 61 switch matrix, nearl...
Description12.1in Infrared Touch Panel TIP-4131SCE1 , Fast response time < 50mS, 81 x 61 switch...
Features: • Fast response time < 50mS• 81 x 61 switch matrix, nearly 5000 switches&...
Vishay Dale® TIP products TIP-3526PCS-8 are infrared touch panels designed to fit most flat panel display technologies. The touch panels consist of infrared emitters and detectors, scanning electronics, a microprocessor based controller, a bezel and optical filter assembly and hardware to mount the touch panel assembly to the flat panel display.
These touch panels are ideal for many applications including medical instrumentation, machine or process controllers, point of sale devices, public information displays, banking terminals and military.
TIP-3526PCS-8 Each panel has infrared LED emitters and phototransistors along the X and Y axis, forming a grid of infrared light beams across the face of the display. The first two numbers of the TIP "matrix" number specify the number of X axis (vertical) beams, and the last two numbers specify the number of Y (horizontal) beams. The controller scans the emitter/detector pairs one at a time and determines whether both X and Y beams are blocked, indicating that a finger or stylus is present. (When beams are blocked on only one axis, they are ignored and not reported.) The controller determines the coordinates of the touch point and reports it to the host computer. By interpolating, a "virtual" beam between two physical beams, the number of touch points on each axis is effectively doubled. When an odd number of beams along either axis are blocked, the coordinate of the center physical beam is reported. When an even number of beams are blocked, the coordinate of the virtual beam in the center of the blocked beams is calculated and reported.
Vishay Dale's® TIP touch panels TIP-3526PCS-8 have a unique patented scanning and logic system that make them virtually immune to most lighting environments. The touch controller supports ENTER, EXIT, CONTINUOUS and TRACKING report modes or combinations of these modes. The controller also has a beeper output. Hardware handshaking, software handshaking, baud rates, auto-baud and X, Y coordinate invert features are jumper selected. The user initializes the desired report modes and requests reports when needed.
Several optical filters TIP-3526PCS-8 are standard to provide the most cost effective filter for each application. "Non-standard" filters may be specified as well. The filter increases the contrast ratio of the display and protects the display face and electronics. Dale® can assist in recommending the optimum filter based on years of experience as a display manufacturer. The perimeter of the filter is bonded to the bezel, and a bezel to front panel gasket