RF Amplifier DC - 60GHz LNA Gain Block
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Type : | Low Noise Amplifier | Operating Frequency : | 60 GHz | ||
Noise Figure : | 3 dB | Operating Supply Voltage : | 6.5 V | ||
Supply Current : | 200 mA | Package / Case : | 1.3 mm x 1.06 mm |
Symbol |
Parameter |
Value |
NOTES |
V+ |
Drain Voltage |
6.5 V |
2/ |
V- |
Gate Voltage Range |
-2 TO 0 V |
|
I+ |
Drain Current (Quiescent) |
200m A |
|
| IG | |
Gate Current |
10 mA |
3/ |
PIN |
Input Continuous Wave Power |
TBD |
|
PD |
Power Dissipation |
0.69 W |
2/ 4/ |
TCH |
Operating Channel Temperature |
110 |
5/ |
TM |
Mounting Temperature (30 Seconds) |
175 |
|
TSTG |
Storage Temperature |
-65 to 110 |
1/ These ratings represent the maximum operable values for this device.
2/ Combinations of resistors voltage and 3V (MAX) on mHEMT.
3/ Total current for the entire MMIC.
4/ When operated at this bias condition with a base plate temperature of 70 , the median life will be reduced.
5/ Junction operating temperature will directly affect the device median time to failure (MTTF). For maximum life, it is recommended that junction temperatures be maintained at the lowest possible evels.
The TriQuint TGA4811 is a DC - 60 GHz low noise amplifier that typically provides 15 dB small signal gain and input and output return loss is <10dB. Normal Noise Figure is 3.0 dB from 2 - 40 GHz. P1dB is 13 dBm.
The TGA4811 is an excellent choice for Test Equipment, 40Gb/s optical network applications, and general wideband LNA and Gain Block applications.
The TGA4811 is 100% RF tested to ensure performance compliance. Lead-Free & RoHS compliant. Samples are available.
Technical/Catalog Information | TGA4811 |
Vendor | Triquint Semiconductor Inc |
Category | RF and RFID |
Function | Amplifier |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | TGA4811 TGA4811 |