TGA1171-SCC

1/ These ratings apply to each individual FET.
2/ Junction operating temperature will directly affect the device median time to failure (TM). For maximum life, it is recommended that junction temperatures be maintained at the lowest possible levels.
3/ When operated at this bias condition with a base plate temperature of 70 0C, the median life is reduced from 9.5 E+6 to 6.1 E+5 hours.
4/ Combinations of supply voltage, supply current, input power, and output power shall not exceed PD.
5/ These ratings represent the maximum operable values for this device.

The TriQuint TGA1171-SCC is a two-stage PA MMIC design using TriQuint's proven 0.25 mm Power pHEMT process to support a variety of millimeter wave applications including point-to-point digital radio and pointto- multipoint systems.

The balanced design consists of four 400 mm input devices driving eight 400 mm output devices.

The TGA1171 provides 29 dBm of output power at 1 dB gain compression and >30 dBm saturated output power across 36-40 GHz with a typical small signal gain of 14 dB.

Typical Input/Output RL is typically greater than 12-15 dB across the band.

The TGA1171 requires minimal off-chip components. Each device is 100% DC and RF tested on-wafer to ensure performance compliance. The device is available in chip form.