Features: · High Power· High Surge Current· Low On-State Voltage· High Commutation Performance· UL registered E76102Application· Home Appliances· Water Heaters· Heater Controls· Lighting Controls· Temperature ControlsSpecifications Symbol Parameter Condition Ratings Units VDRM Rep...
TG40E80: Features: · High Power· High Surge Current· Low On-State Voltage· High Commutation Performance· UL registered E76102Application· Home Appliances· Water Heaters· Heater Controls· Lighting Controls· T...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Condition |
Ratings |
Units |
VDRM | Repetitive Peak Off-State Voltage |
800 |
V | |
IT(RMS) | R.M.S On-State Current | TC = 64 |
40 |
A |
ITSM | Surge On-State Current | One Cycle,60Hz, Peak, Non-Repetitive |
420 |
A |
I2t | I2t (for fusing) | Value for one cycle surge current |
730 |
A2s |
PGM | Peak Gate Power Dissipation |
10 |
W | |
PG(AV) | Average Gate Power Dissipation |
1 |
W | |
IGM | Peak Gate Current |
3 |
A | |
VGM | Peak Gate Voltage |
10 |
V | |
di/dt | Critical Rate of Rise of On-State Current | IG =100mA, VD=1/2VDRM, diG/dt=1A/s |
50 |
A/`s |
Tj | Operating Junction Temperature |
-40 to +125 |
||
Tstg | Storage Temperature |
-40 to +150 |
||
VISO | Isolation Breakdown Voltage | R.M.S. , A.C. 1 minute |
2500 |
V |
Mounting Torque (M4) | Recommended value 1.0 1.4 N*m |
1.5 |
N*m | |
Mass | Typical Value |
23 |
SanRex Triac TG40E80 is specially designed use for high power AC switching application. Thanks to SanRex's new isolated diffusion technology, the Triac TG40E80 features high dv/dt, dv/dt/c and very low on-state voltage. These benefits make this design an extremely reliable and efficient device for use in wide variety of applications.