TFS465A

Features:






Specifications






Description

      This is the description about TFS465A of the VI relefilter filter specification. The maximum of the pass band attenuation amax is defined as the insertion loss ae. The nominal frequency fN is fixed at 465,0 MHz without tolerance. The given values for the absoult attenuation ae have to be reached at the frequencies given below even if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc.
      Here are the TFS465A features: Ambient temperature is 23°C. Input power level is 0dBm. Terminating impedances for input is 50. Terminating impedances for output is 50.
      The TFS465A absolute Maximum Ratings are these (TA = 25°C). Insertion loss (Reference level) is 4,8 dB. Nominal frequency is 465 MHz. Pass band is fN ± 2,5 MHz. Operating temperature range is from - 10°C+ 85°C. Storage temperature range is from - 30 °C to + 85 °C. Temperature coefficient of frequency is - 0,036ppm/K.
      These are the TFS465A Stability Characteristics. After the following tests the filter shall meet the whole specification:
(1). Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 27. (2). Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 6. (3). Change of -55 °C to 125°C / 30 min. each / 10 cycles temperature: DIN IEC 68 part 2 14 Test N. (4). Resistance to solder heat (reflow): reflow possible: twice max.; for temperature conditions, please refer to the attached "Air reflow temperature conditions"
      At present there is not too much information about this model. If you are willing to find more about the TFS 465A, please pay attention to our web! We will promptly update the relevant information. You can find it in www.ChinaICMart.com or www.seekic.com. Welcome to contact with us.