Features: • Compliant to IrDA 1.2 (Up to 115.2 kbit/s),HPSIR®, Sharp ASK® and TV Remote• For Sunk Mounting at the PCB Edge 1.8 mm Height over Board• Operating 2.7 to 5.5 V Applications• LowPower Consumption 1.0 (1.3) mA Supply Current @ 3 V (5 V)• Power Sleep...
TFDS4400: Features: • Compliant to IrDA 1.2 (Up to 115.2 kbit/s),HPSIR®, Sharp ASK® and TV Remote• For Sunk Mounting at the PCB Edge 1.8 mm Height over Board• Operating 2.7 to 5.5 V...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Test Conditions | Symbol | Min | Typ | Max | Unit |
Supply Voltage Range |
0 V < VCC2 < 6 V |
VCC1 |
-0.5 |
6 |
V | |
0 V < VCC1 < 6 V | VCC2 | -0.5 | 6 | V | ||
Input Current | For all Pins, Except IRED Anode Pin |
|
10 |
mA | ||
Output Sink Current |
|
25 |
mA | |||
Power Dissipation | See Derating Curve | PD | 200 | mW | ||
Junction Temperature |
Tj |
125 |
||||
Ambient Temperature Range (Operating) |
Tamb | -25 | +85 | |||
Storage Temperature Range |
Tstg |
-25 |
+85 |
|||
Soldering Temperature |
See Recommended Solder |
215 | 240 | |||
Average Output Current |
IIRED (DC) |
100 | mA | |||
Repetitive Pulsed Output Current |
<90 s, ton <20% |
IIRED (RP) | 50 | mA | ||
IRED Anode Voltage | VIREDA | 0.5 | 6 | V | ||
Transmitter Data Input Voltage |
VTxd |
0.5 |
VCC1 |
V | ||
Receiver Data Output Voltage |
VRxd |
0.5 |
VCC1 |
V | ||
Virtual Source Size | Method: (11/e) encircled energy |
d |
2.5 |
2.8 |
mm | |
Maximum Intensity for Class 1 Operation of IEC8251 or EN608251 (worst case IrDA SIR pulse pattern *) |
EN60825, 1997 | 400 |
mW/sr |
*) Note:
Transmitted data: continuously transmitted "0". In normal data transfer operation "0" and "1" will be transmitted with the same probability. Therefore, for that case, about a factor of two of safety margin is included. However,for worst case thermal stress testing such data pattern are often used and for this case the 400 mW/sr value has to be taken.
The TFDS4400 is a lowpower infrared transceiver module compliant to the IrDA 1.2 standard for infrared data communication, supporting IrDA speeds up to 115.2 kbit/s (SIR), HP-SIR, and carrier based remote control modes up to 100 kHz. Integrated within the transceiver module are a photo PIN diode, infrared emitter (IRED), and a lowpower control IC to provide a total frontend solution in a single package. Vishay Telefunken's TFDS4400 transceiver represents a novel package option enabling a minimized package height over the PCB of only 1.8 mm and nevertheless offering a full 1m IrDA 1.2 transmission range. The transceiver is capable of directly interfacing with a wide variety of I/O chips which perform the modulation/demodulation function, including National Semiconductor's PC87338, PC87108 and PC87109,SMC's FDC37C669, FDC37N769 and CAM35C44,and Hitachi's SH3. At a minimum, a current limiting resistor in series with the infrared emitter and a VCC bypass capacitor are the only external components required to implement a complete solution.