Features: • Compliant with the latest IrDA physical layer specification (9.6 kbit/s to 115.2 kbit/s)• Small package: H 2.74 mm x D 3.33 mm x L 8.96 mm• Typical Link distance 1 m• Drop in replacement for IRM5000D/ IRMT5000• Battery & Power Management Features:> ...
TFBS4710: Features: • Compliant with the latest IrDA physical layer specification (9.6 kbit/s to 115.2 kbit/s)• Small package: H 2.74 mm x D 3.33 mm x L 8.96 mm• Typical Link distance 1 m...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.28 - 1.93 / Piece
Infrared Transceivers SIR 115.2 kbits/s 2.4-3.6V Op Voltage
US $1.41 - 1.93 / Piece
Infrared Transceivers SIR 115.2 kbits/s 2.4-3.6V Op Voltage
Parameter | Test Conditions |
Symbol |
Min |
Typ. |
Max |
Unit |
Supply voltage range, all states |
VCC |
-0.3 |
+6.0 |
V | ||
Input current | For all Pins except IRED Anode Pin |
ICC |
10.0 |
mA | ||
Output sink current,RXD |
25.0 |
mA | ||||
Average output current, pin 1 | 20 % duty cycle |
IIRED (DC) |
60 |
mA | ||
Repetitive pulsed output current | < 90 s, ton < 20 % |
IIRED (RP) |
300 |
mA | ||
IRED anode voltage, pin 1 |
VIREDA |
-0.5 |
+6.0 |
V | ||
Voltage at all inputs and outputs | Vin > VCC is allowed |
VIN |
-0.5 |
+6.0 |
V | |
Power dissipation | See derating curve |
200 |
mW | |||
Junction temperature |
125 |
|||||
Ambient temperature range (operating) |
Tamb |
-30 |
+85 |
|||
Storage temperature range |
Tstg |
-40 |
+100 |
|||
Soldering temperature | See Recommended Solder Profile |
260 |
The TFBS4710 is a low profile, full range Infrared Data Transceiver module. TFBS4710 supports IrDA data rates up to 115.2 kbit/s (SIR). The transceiver module consists of a photo PIN photodiode, an infrared emitter (IRED), and a low-power CMOS control IC to provide a total front-end solution in a single package.
The TFBS4710 has a link distance of 1 meter. The RXD pulse width is independent of the duration of TXD pulse and always stays at a fixed width thus making the device optimum for all standard SIR Encoder/ Decoder and interfaces. The Shut Down (SD) feature cuts current consumption to typically 10 nA.