TDA2595

Features: ` Positive video input; capacitively coupled (source impedance < 200 W)` Adaptive sync separator; slicing level at 50% of sync amplitude` Internal vertical pulse separator with double slope integrator` Output stage for vertical sync pulse or composite sync depending on the load; both ...

product image

TDA2595 Picture
SeekIC No. : 004516234 Detail

TDA2595: Features: ` Positive video input; capacitively coupled (source impedance < 200 W)` Adaptive sync separator; slicing level at 50% of sync amplitude` Internal vertical pulse separator with double s...

floor Price/Ceiling Price

Part Number:
TDA2595
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2025/1/12

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

` Positive video input; capacitively coupled (source impedance < 200 W)
` Adaptive sync separator; slicing level at 50% of sync amplitude
` Internal vertical pulse separator with double slope integrator
` Output stage for vertical sync pulse or composite sync depending on the load; both are switched off at muting
` 1 phase control between horizontal sync and oscillator
` Coincidence detector 3 for automatic time-constant switching; overruled by the VCR switch
` Time-constant switch between two external time-constants or loop-gain; both controlled by the coincidence detector j3
` j1 gating pulse controlled by coincidence detector 3
` Mute circuit depending on TV transmitter identification
` j2 phase control between line flyback and oscillator; the slicing levels for 2 control and horizontal blanking can be set separately
` Burst keying and horizontal blanking pulse generation, in combination with clamping of the vertical blanking pulse (three-level sandcastle)
` Horizontal drive output with constant duty cycle inhibited by the protection circuit or the supply voltage sensor
` Detector for too low supply voltage
` Protection circuit for switching off the horizontal drive output continuously if the input voltage is below 4 V or higher than 8 V
` Line flyback control causing the horizontal blanking level at the sandcastle output continuously in case of a missing flyback pulse
` Spot-suppressor controlled by the line flyback control



Specifications

Supply voltage (pin 15) V15-5 = VP max. 13,2 V
Voltages at:
pins 1, 4 and 7 V1;4;7-5 max. 18 V
pins 8, 13 and 18 V8;13;18-5 max. VP V
pin 11 (range) V11-5 -0,5 to +6 V
Currents at:
pin 1 I1 max. 10 mA
pin 2 (peak value) ± I2M max. 10 mA
pin 4 I4 max. 100 mA
pin 6 (peak value) ± I6M max. 6 mA
pin 7 I7 max. 10 mA
pin 8 (range) I8 -5 to +1 mA
pin 9 (range) I9 -10 to +3 mA
pin 18 ± I18 max. 10 mA
Total power dissipation Ptot max. 800 mW
Storage temperature range Tstg -25 to + 125
Operating ambient temperature range Tamb 0 to + 70



Description

The TDA2595 is a monolithic integrated circuit intended for use in colour television receivers.


Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Transformers
LED Products
Batteries, Chargers, Holders
Circuit Protection
Potentiometers, Variable Resistors
Soldering, Desoldering, Rework Products
View more