Features: · 0.75A source/1.2A sink min gate drive · Active Miller clamp feature · Two steps turn-off with adjustable level and delay · Desaturation detection · Fault status output · Negative gate drive ability · Input compatible with pulse transformer or optocoupler · Separate sink and source outp...
TD350: Features: · 0.75A source/1.2A sink min gate drive · Active Miller clamp feature · Two steps turn-off with adjustable level and delay · Desaturation detection · Fault status output · Negative gate dr...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
· 0.75A source/1.2A sink min gate drive
· Active Miller clamp feature
· Two steps turn-off with adjustable level and delay
· Desaturation detection
· Fault status output
· Negative gate drive ability
· Input compatible with pulse transformer or optocoupler
· Separate sink and source outputs for easy gate drive
· UVLO protection
· 2kV ESD protection
· 1200V 3-Phase Inverter
· Motor Control
· UPS Systems
Symbol |
Parameter |
Value |
Unit |
Unit |
Maximum Supply Voltage (VH - VL) |
28 |
V |
VH |
Maximum VH voltage vs. GND |
28 |
V |
VL |
Minimum VL voltage vs. GND |
-12 |
V |
Vout |
Voltage on OUTH, OUTL, CLAMP pins |
VL-0.3 to VH+0.3 |
V |
Vdes |
Voltage on DESAT, FAULT, LVOFF pin |
-0.3 to VH+0.3 |
V |
Vter |
Voltage on other pins (IN, COFF, VREF) |
-0.3 to 7 |
V |
Pd |
Power dissipation |
500 |
mW |
Tstg |
Storage temperature |
-55 to 150 |
|
Tj |
Maximum Junction Temperature |
150 |
|
Rhja |
Thermal Resistance Junction-Ambient |
125 |
/W |
Rhjc |
Thermal Resistance Junction-Case |
22 |
/W |
ESD |
Electrostatic discharge |
2 |
kV |
Symbol |
Parameter |
Value |
Unit |
VH |
Positive Supply Voltage vs. GND |
UVLO to 26 |
V |
VL |
Negative Supply Voltage vs. GND |
0 to -10 |
V |
VH-VL |
Maximum Total Supply Voltage |
26 |
V |
Toper |
Operating Free Air Temperature Range |
-40 to 125 |
TD350 is an advanced gate driver for IGBT and power MOSFET. Control and protection functions are included and allow the design of high reliability systems.
Innovative active Miller clamp function avoids the need of negative gate drive in most applications and allows the use of a simple bootstrap supply for the high side driver TD350 includes a two-level turn-off feature with adjustable level and delay. This function protects against excessive overvoltage at turn-off in case of overcurrent or short-circuit condition. Same delay is applied at turn-on to prevent pulse width distortion.
TD350 also includes an IGBT desaturation protection and a FAULT status output.
TD350 is compatible with both pulse transformer and optocoupler signals.